Tuesday, January 1, 2008

Ideas

For those married guys out there, read this, it might save you some headaches.

I'm not saying that my example has been a headache, but it did happen to change some of my priorities for me. if you have ever said to yourself, "Wow, it would be a good idea to do .... [Fill in the blank]" and if this was in reference to something for the wife/significant other/girlfriend, then you should know all about this.

There is a time & place to present ideas that the wife might be interested in. As I have recently learned, it should only be AFTER all of the things you want have been completed. I had two objectives to accomplish today.

  1. Remove the fence from the back yard, to include the posts that were previously holding it up.
  2. Clean the house (excluding the garage).

Well, due to my big mouth, these priorities were altered. Granted, neither of my objectives for the day truly had a deadline, therefore this was not a big issue. However, for future reference, this is what did occur and why.

Yesterday, we did some shopping at Sears. We both had a few things that we wanted to get for the house and had some giftcards to use. Therefore, we picked up the following:
  • Brushwacker (attachment for the weedwacker)
  • Omelet/poached egg maker (something my mom wanted us to have & sounded like a good idea, which, BTW, it was.)
  • New set of Pots & Pans (since we were already looking in that area, we decided that since we had the money and we could use it, we'd get it)
Well, when we returned home with our booty, it was time to find homes for what we purchased. Well, as you can imagine, we now had more pots & pans than we had homes for. I had already devised an idea as to where to put them, but had yet to have presented the idea to Angel. Well, it would seem that now would be as good of a time as any. I presented to her that we create a pots & pans rack to put on one of our walls in the kitchen. So, I explained my vision to her and apparently this was too good of an idea. Once I was motivated to start working around the house today, Angel asked if Home Depot/Lowes was on the agenda. Well, as of that point, it became an overriding activity for us today.

We took our giftcards for Lowes with us and headed out. We picked up the supplies for the construct and returned home. It turns out the rack supplies came to the exact amount that we had in giftcards, man, was that ever nice. :) The items we purchased for this rack included the following:
  • 2 1/2" 38" pipes
  • 4 1/2" 6" pipes
  • 2 1/2" floor mounts
  • 2 1/2" elbow fittings
  • 2 1/2" T fittings
  • 15 closed loop S hooks
  • 2 threaded adjustable tension cable connectors
  • 2 closed loop wall anchors
  • 4 cable clamps
  • 1 can of Rustolium grey hammered finish spray paint
Notice that the cable is not mentioned, it wasn't forgotten, we just happened to have some at home in the shed.

So, when we get home, I test fit everything together and we're good so far. Once I take it a back apart, do a test fit of the closed S loops to see if then will fit on the pipes. No-go! Damn. There are 15 of these things and I have to unbend each one of them. So, once I get them unbent to fit the pipe and the other end open to hold the pots & pans, I tape the threads on the pipes and head to the shed to do some painting. the parts were all different colors and conditions, therefore, we wanted to make it uniform. I get to painting the parts, which didn't take to long.

At this point, it occurs to me that I should have dealt with the closed loop S hooks after applying the paint. The paint will take 2 hours to dry (due to the temperature, our high today was around 45). Unfortunately, by the time the paint application is finished, it is already 5 PM. This
does not give me too much time to work in the yard. Oh, well. I will get what I can completed. So, the fence is down now, and the front three vertical supports are out of the ground. There are only 4 posts left to deal with and I'll get to them eventually. Also, note, that Angel did do some cleaning while I was working, so I can't really complain too much that my objectives were not met, as they were hit to some degree or another.

Once I'm done with what I can get to today in the yard, it is now 6 PM and I still have an hour to kill. I putz around on my computer for a bit and realize that it is now 7:15 PM. Time to return to work on the rack. I check the parts by flashlight and to my surprise, they are dry. I take them down and into the house to finish. It is too cold to be subjecting myself to working outside for no reason. Once the tape is taken off of the threads, the assembly begins. The actual assembly of the rack is completed in much shorter time than earlier because I already figured out the tricks of the system.

Keep in mind, threaded pipe is not designed to be joined into circles with itself. Thankfully, water will not be traversing this thing, one of the pipes is not completely tight because the threads are opposing when trying to get it into one fitting and then into another. Therefore, a comprise was struck, tightened one side real well and then loosen it to thread it into the other. The important part is that it works.

Once the structure is constructed, I start working on the cabling. This took longer than I had expected, but then again, what does? My first and second trial with this process resulted in cables that were WAY too long to suite the need. Finally, the third attempt got it to the length required. If it hasn't been obvious yet as to what the cables are for, it is to prevent the pots & pans from ripping the bracket off the wall if it were to get too heavy. Pictures will be provided at the end to clarify how they play into the system.

Now that the cables are in place, I mount the "floor fittings" to the wall. Now, I was lazy and didn't bother looking for studs (thus the additional cable supports), so I used screws that were designed to act like drywall anchors and screws in one. Also, since I wasn't looking for studs, I put the screws in last so not to tempt the structure from pulling itself off of the wall.

So, I did get something accomplished today. I think it even turned out pretty well. Although, it wasn't on my list of things to do, although my to-do list for the day wasn't vital, so I didn't mind doing it. Although, next time I have any thoughts about a home improvement project, I will wait until my to-dos are done first before presenting it. :) Just a word to the wise that just because you offer an idea for the future, the future might be closer than you anticipate.

As promised, here are the pictures:


3 comments:

Unknown said...

Bob,

Nice work. I also like the phone behind the pots ;)

Gigawatz said...

Well, that is where the phone jack is in the kitchen. It is a portable phone, so I didn't see the harm in leaving it there.

It isn't like there will be the requirement that you are using the phone in close proximity to the new "appliance".

Anonymous said...

Son,
What a great idea.....it looks great. You are becoming the home-body and it is nice to you taking an interest in keeping your house in tip top shape(not like at home when it took you how many years to fix the hole in the wall) LOve Ya mom