Showing posts with label Cars. Show all posts
Showing posts with label Cars. Show all posts

Sunday, February 1, 2009

Angel's 30!!

So, I had way too much fun leading up to Angel's birthday. Granted, this was only fun as the younger one that has yet to reach that milestone. We didn't have anything extravagant planned, but we did mange to make it a good night.

Well, apparently I had executed an interesting faux pas prior to the day in question. Historically, I've only felt compelled to inquire against someone's desire for a gift in the event that I don't already know. Therefore, I knew what the gift would be and never asked. As to some additional logic, I knew the item in question would not be on the request list even though the item was a wishlist item. Therefore, since I knew better, I didn't feel the need to ask. Well, this caused all kinds of fears. I got an e-mail from Angel's mom saying that a comment was made regarding me forgetting about their birthday. I guess I never realized that it was an obligatory inquiry instead of a necessity. Of course I didn't forget.

Anyway, the enjoyment for me started the night before her b-day. I kept giving her periodic updates as to the impending midnight hour. I would give her comments like "you only have 2 hours left as a 20-something" or my favorite one, "you only have x time before you are OLD". There were a few others, but those were the memorable ones.

So, in typical fashion, I waited until the day before to go shopping. Thankfully I knew what I was after and where I was getting it from. Therefore, it wasn't a huge deal. I also had further reason for the delay. I knew if I were to have gone shopping earlier, she would have seen the transaction against our account. And it wasn't a particularly small transaction that would have been easily overlooked.

So, even with the periodic time updates for "crossing the line", I made up for it with my gift. I purchased her a set of Diamond Audio D363.5 component speakers. Back around April, I was looking for some more hardware for my car and Angel was with me. She had an opportunity to "view" several tiers of the Diamond Audio line. She instantly fell in love with them. I knew that I couldn't go wrong with them, even if I did stay with their lowest tier. So, at about 12:20 AM on her birthday, I delivered the gift. I couldn't wait. I wanted to see the reaction. I just knew I'd catch her off guard. And I certainly succeeded.

Well, of course, with the delivery of a gift as such, soon followed the installation of the speakers. Angel did the majority of the deconstruction of the dashboard and doors. I had to step in for a couple of things, but she handled the bulk of it. Once we were inside the doors we quickly found out that we would have to obtain an adapter to install the mid-range speakers. The mounting point was square and of course the round speaker was designed to be installed, well, round.

Well, it just so happened that we were taking a trip to Pittsburgh which allowed me to hand deliver the original speaker and the replacement speaker to Mike (proprietor of Car-Speaker-Adapters.com since photos and measurements provided over the phone were not ample to the identification of the correct adapter. He was unable to readily identify the adapter because Hyundia is a model that he hasn't worked with in the past. Therefore, while we were home, he was able to do the fabrication and send us on our way with our new parts.

When we got home, we cut the holes in the covers for the A-pillar, found homes for the crossovers (in the dashboard incidentally) and wired it up. It was such a pleasure to hear them for the first time in their new homes. The difference from factory to aftermarket is just so profound it isn't very funny.

Once we got the car reassembled, it was time to start cruising around to hear how traveling effected the system. Well, even without a 4 channel amp to push the component system, the results are great. I know that Angel is pleased with the results and that just makes me happy.

In closing, I highly recommend after market component speakers to anyone who is looking to improve the clarity and definition of their car stereo system. Please remember, you get what you pay for. Therefore, if you go to Wally-World and buy the $50 specials and are then not happy with their performance, don't blame me.

Additionally, the tweeter placement is also very important. I cannot give you pointers on this because I've only dabbled into this arena just recently. I have seen only two configurations with any real scrutiny and there are, by far, many more than that to choose from. I can say that there is a stark difference between my car and Angel's. This is not only due to speaker design & manufacturing differences (i.e. cost) but also from installation placement. My system has front to back depth whereas her's has a left-to-right depth.

Read More......

Saturday, January 31, 2009

We're Still Alive

Everyone who periodically checks in with us, I apologize. We have been quiet for a while again. According to my login, my last post was in mid October. I have half written messages that need completing, I have more Driver's Rant articles on the table, and I also have much catching up to do. However, in the grand scheme of things, there haven't been many earth shattering occurrences during this latest quiet time.

I am not going to get in-depth on each topic that I would like to catch-up with here. However, here is a quick run-down of the highlights:

  • Beagle got married
  • My hockey team won the championship from the season I was documenting
  • My NG unit has been placed on alert
  • Angel turned 30
  • We upgraded the speakers in Angel's car
  • We got a Wii
  • Angel got a second job
  • We finally got our wedding picture album
  • I've started another season of hockey
  • I put down some flooring material in our attic
Of course there is a story that can go along with each event. A couple of them have already been started and I may get around to writing about the others. Time will tell.

However, you may be asking yourself, "What has come about that I'm finally getting around to doing some writing again?" Well, that would be a fine question. I am patiently waiting for an OS installation to complete on my new server. My old server finally kicked the bucket and I'm working on creating its replacement. I'm sure I've noted in the past (around the time we had the lightning strike) that my server wasn't in very good health. Well, I was correct and I neglected to build the replacement server before it went belly up. Thankfully, I know now that I didn't lose any data, although, it was a grave concern at the start of this process.

Speaking of building my server. I can't say how frequently I'll be returning here to put up additional posts. Ever since my unit was placed on alert, it seems that my priorities have changed. I have found much motivation to tie up loose ends that didn't seem so loose before. I have been working on a website now for what feels like almost a year, and I still don't have it complete. I have placed much pressure on myself to get this project completed. This is so that in the event that the mobilization order comes down, I will not have to tell him that the project will have to wait until I get back. I have other projects and things that I would also like to start/continue to follow this one. Therefore, my time is even more at a premium than it was before. I am not saying that I won't get around to it, because I would like to, though, time will dictate the results.

Read More......

Friday, October 10, 2008

Our Trip Home

As many of you know, Bob and I had made a trip up to the Burg a few weeks ago. And I do apologize to those we couldn't get together with. It was just a whirlwind of a weekend as much of them seem to be starting to become lately.

I can't speak for Bob but I know that for myself I was really looking forward to having a few days off. It isn't often that I take time off from work. I was really starting to feel the need for some vacation time. Well, the time that we had at home was much more relaxing for Bob than it was for me.

Our time home started out with me heading to a court hearing with my parents. Granted I didn't need to be there but, I wanted to be there for moral support for my sister-in-law; stressful mind you. I haven't seen my brother in a year and haven't talked to him in the same length of time. So, I wasn't sure how this was going to go with him and then seeing his new girlfriend for the first time. To top the day off, I got a parking ticket while we were there. Fortunately, my Mom was with me and fought it. The ticket went away and we continued on our merry way. We had a family get together that evening which was wonderful. I love how loud the house gets with all the kids being together (one of the things that I do truly miss).

Unfortunately one of the neighbors passed away. Mom and I went to a funeral on Friday. She was a really sweet lady that always made sure that she at least said hello to you. She always had a smile on her face and that's how I'll always remember her.

Bob and I went to the rehearsal dinner for one of our friends weddings. It was great to spend time with the bride and groom before the day of the wedding. Then Bob and I went out afterwards and ran into one of his old friends. So it made it a great ending of a fun evening.

Saturday Bob and I attempted to attend the ceremony but because of different circumstances we missed it. But, we did go to the reception at the zoo which was fun. It wasn't what we were thinking that it would be for the type of environment. Think about it; a wedding reception at the zoo. We were both thinking that we would probably be walking around and being able to see the animals. Quite the contrary, it was a typical reception with no walking around the zoo at all. The area was covered by a huge tent. A dance floor in the middle and buildings close by for restrooms and things like that.

With how the week was for me it was great to have a fun filled evening and being able to relax. When we left we got into a car accident. Which infuriated me. It was my car that Bob was driving and this teenager, by the way it sounded, was going to run the light until he saw us pulling out. He slammed on the brakes with the roads being wet, slid through the intersection and into my front bumper. Thank God that Bob inched out. Anyone that knows Bob, knows that this typically isn't like him at all. If it wasn't for that little thing, we would have been hit driver side tire, if we were lucky. This would have caused us to not be able to drive home. I jumped out of the vehicle and made sure that everyone in the other car was fine. After that I yelled at this kid to just get off the road. My main concern at that point was other people doing the same thing and causing more damage. At this point, I knew that my car was drivable to get home and I wanted to keep it that way.

I now have a new front bumper but, I was not happy that on our first anniversary I had to go driving around and get estimates for it. His parents paid us out of pocket for the damage to my vehicle. Yes, I knew, and still know, that I would have had every right to chew the kid out. But, seeing how he was acting and how his father was treating him, it was clear that he wouldn't hear the end of it for a while. So, why make things worse then they are? By the way it sounds, this kid will be taking the bus everywhere for a long time.

By time Bob and I got back to my parents house he had looked at me and said that I needed a vacation from my vacation. I felt the same way. I told him that the way the week was going for me why not add this accident into the whole mix.

I will admit that I'm really looking forward to our next trip home at the end of this month, knowing that it won't be nearly as stressful as last time.

Read More......

Monday, September 1, 2008

Driving Rant - Highway Driving Sans Radar Detector or With?

To continue in the series of posts regarding the ideas that I contemplated during my quiet drive from PA to GA, this next installment will address the use of a radar detector. As I know it has been noticed, I have a lead foot. Well, due to this, it has crossed my mind several times about purchasing a radar detector.

I know several people that swear by them and won't drive without them. However, the only times that I've ever driven with one was when I borrowed THay's car. I really found it to be extremely annoying. The only time the damn thing made any noise, it was just picking up stray radiation, never had I been in the car when it detected a gun.

Now, this is a stat that I'm sure you will find amazing. In all of my years of driving, I have only ever received two tickets for speeding. Once was on Ohio River Blvd on my way home from work one spring from DPI in Emsworth. I am uncertain what method was used to clock me, however, I am pretty sure it was VASCAR, not radar. The other time I was caught, it was in WV on my way home last year for Thanksgiving. I know for certain that radar was not in use for that one. The policeman used his speedo to determine my speed since he was tailing me and I didn't realize it.

So, with my two tickets, having had a detector would have done me absolutely no good. On the other hand, if I were to buy a radar detector, to avoid a single speeding ticket would make it worth it. I can't recall the cost of my first ticket, but the second one exceeded $150. Generally speaking, a detector will run you about that much. Therefore, if I were to finally break down and buy one, any time I am able to avoid being pulled over for speeding is money in my pocket. However, how often will that really occur?

I know for certain that there have been several times that I have passed highway patrol during my interstate trips and have wondered why they didn't pull me over. I know for certain that I was caught dead-to-rights. Sometimes I think that it might have something to do with my license plate. However, the NG emblem on my plate is pretty small and hard to identify unless you are directly behind me on the highway. Therefore, I really think that I have to exclude that as a defense. Therefore, why do police not bother pulling me over? Am I speeding within their tolerance range for wanting to pull over drivers? Maybe, but not always. I can't explain it.

Owning and using a radar detector is not a fool-proof way around a speeding ticket. As I mentioned, I've been clocked via VASCAR and by speedo. However, those are not the only things to take into consideration. How about Virginia? Within the entire state, it is illegal to have a radar detector in use. Furthermore, even having one mounted in your car should you be pulled over is enough to anger a cop and land you with an additional ticket and potential confiscation of your device. I don't know how many other states have similar laws, but from PA to GA, VA is the only one.

Anyway, I don't have an answer to this debate. What I do know though, is that I know many more people that don't have them than do. I think that this statistic alone is enough to answer the question. However, I would like to open up the floor to hear what you guys have to say. Is the cost of a radar detector worth the peace of mind and potential lack of tickets that they claim to avoid?

Read More......

Wednesday, August 27, 2008

Driving Rant - The Drivers Utopia

The second installment in the rant is not so much a rant but it is a reflection on my favorite part of the drive from Pittsburgh to Atlanta and vice versa. There is a section of road in WV that is just fun to drive. By fun, I mean it is akin to a road course track. The road just continuously turns in a cutback fashion that is a real way to see where your driving skills are at and how your car handles.

When I'm driving this section of road, there is not a preference of driving north to south or south to north. If there is any preference, it would be on the drive north. This direction gives you a gradual introduction into the turns. You can slowly realize you are in this area. Conversely, during the drive to the south, you suddenly find yourself in the turns and they eventually fade out.

Please keep in mind, this area is not always fun or anywhere close to safe in which to screw around. The majority of driving in WV is in the mountains and is prone to bad weather. Snow, rain, and/or fog will really make this area more "fun" than it has any right to have. Although, if you catch this section when it is clear, day or night, you can put the pedal down and really challenge yourself and your car.

This segment of road that is so much fun is between mile marker 57 and 99 on I-79. However, this is not 42 miles of continuous twists and turns. I think that there are really three sections in this 42 mile stretch. When driving north, you will get on to I-79 from Route 19 at marker 57. From mile 57 to 69 the turns are gentle and are very spread out. During this 12 mile segment, you can slowly ramp up your speed and see what you are willing to handle. However, these turns are slightly more gentle than the ones in the later sections of this road. You may not even realize that you are here when you first get here. It isn't until you get into the second section that the frequency and tightness of the turns may catch your attention. From marker 69 through 79 you may begin to realize that the fun is approaching, but these still do not hold a candle to the best section of the road.

Mile marker 79 - 99 is just a constant barrage of turn after turn and hill after hill. These turns are not Indy car sharp, but for an over the road experience, I've yet to find better. I have been able to take these turns in a few different vehicles and I can say that you must pay attention to your car and what it has to tell you.

Before I get into the details of how I have fared while driving this section of highway, I have to explain my standards for this drive. This is exceptional important to discuss because I am not claiming that I've driven through this area the fastest. I have been passed through the main segment of these turns. However, because of the way the people who have passed me were driving, it made my life difficult. My standard is that brakes are not to be used. Only the throttle deceleration is acceptable to make this drive fluid. The people who have passed me through this section would enter the turns way too fast and slam on their brakes to keep their car on the road. I think this is poor a practice. While you are highway driving you are at the mercy of the other drivers on the road. Brake lights don't tell you how much they are braking. Brake lights alone don't tell you why they are braking. Particularly during night driving, they could have seen a cop or in these mountains, worse, a deer.

I feel that brakes should be reserved for very specific circumstances. I believe that the only reasons brakes should be used on the highway is in an emergency situation, to avoid an accident because of slower (not to mention ignorant) traffic, traffic jams, or police in the vicinity. Outside of that, you should maintain a speed that is easy to control and does not require braking into a turn. I understand that there are times when you enter a turn too quickly and have to brake. I'm not perfect, I've entered a turn too hot before and had to brake. However, the cars that I mentioned were braking into every turn, not just one here and there. They were obviously driving way too fast for the conditions.

So, you may be asking yourself, why I don't think braking into a turn is a good idea? Well, I will give you a simple answer. I like my car, my car is more expensive than I would like to pay to have fixed or replaced. If I don't have to brake into a turn, that tells me that I am in full control. When driving in the mountains, such as this segment of highway, conditions can change in a heartbeat. Therefore, if I am comfortable enough with my speed to not brake, then my car is stable enough to help me react to a change in condition more safely than if I were already braking. So, now that you know my standards, lets talk about what I've done.

I've driven an SUV through here and I could barely get to 80 and maintain it safely. The SUV had too high of a center of gravity to try to push it through the turn at a faster speed. Also, the SUV was not mine and I had only as much experience driving it from Pittsburgh to this point of the highway; all highway driving. Not to mention, this vehicle was not built for speed and I acknowledge that. This truck was for comfort and it did that well, just don't ask it to perform like a car because it won't.

I've driven a Hyndai Elantra through here and was pleasantly surprised. It was not too difficult to push the car to doing 90 through here. However, Angel didn't like me pushing her car that fast through the turns (and I'm sure being on the phone didn't help that opinion much either). But I was certainly pleasantly surprised how it handled. However, I think that 90 was about as fast as I could have gone comfortably.

I've driven my current car, Chrysler Sebring convertible several times through this exhilarating gauntlet. I throttle myself to drive it at 90, though, I could go faster. With all of my fearlessness, driving through here faster than 90 just seems reckless. Yeah, I realize that going 20 miles per hour over the speed limit is reckless already, but to push things further would put my life and well being at additional risk.

The first time I made the trip north through this section in the Sebring, I was very surprised. Since this is the first front wheeled drive vehicle I have ever owned, I thought that with certainty that this car would act differently through these turns. I thought I would loose the feeling of the rear of the car. Therefore, I thought I would loose the ability to enjoy the twists and turns like I had before. Well, I was quickly proven wrong when I decided to test myself at this point in the drive. I started out pretty reserved; getting the feel of the car and the road in the earlier sections. I was quick to learn that the feeling of the car on the road was very similar to that which I was used to in my rear wheel cars. This gave me the confidence to push it a bit harder. I think this first time through these turns I may have pushed the envelope to the vicinity of 95. It was so exhilarating and additional confirmation that I did buy the right car for me.

The only other vehicle that I have driven through this area was my 96 T-bird. To date, this has been the gold standard of a vehicle for me to enjoy through here. I could sustain 90 easily through here, yet I doubt that I ever pushed it more than just peaking out at 100. Please keep in mind that triple digits for me is not common.

So, let me put this driving experience into comparison with some other areas that may be a bit more well known.

No, I can't provide an accurate comparison to Mulholland Drive in California. I have never had the opportunity to be on the road regardless of the chance to drive it. The only reason that I know anything about this road and its racing history is due to "Street Rod 2" It had a race over the road in question. However, I have come to learn that the road in the game was not a representation of the road in real life. I guess that isn't a big deal, knowing the name is what was more important from my perspective.

However, for you Pittsburghers (which most of you are), there is a road that I can make a small comparison against. Baldwin Road is very much a fun road to take, particularly in the ascending direction from Rt. 60. I find the uphill to be more exhilarating and much less dangerous than the descending on this part. If I knew the road was closed and could afford the disaster that could result (personally and to my car) I might think about the downhill (but that will never happen). Furthermore, I think it is unreasonably dangerous. There are just way too many things that could go wrong in the tight turns and narrow road. Conversely, in the uphill direction, there is not as much that could go absolutely disastrously wrong. Going up, you are limited by the horsepower the car can contribute and the suspension to keep the car in the correct lane and the wonderful effects of gravity. The speed limit on this road is 35, and under any but the best of conditions is completely reasonable. Although, living in Pittsburgh for as long as I had, I've had plenty of good condition shots at this road.

So, what is so exciting about this 1/2 mile hill climb? Well, it is the tight and blind cutbacks that bring you to the crest of the hill. Of my cars that I've pushed up this hill, my fastest speed has been a sustained ~55 MPH. However, after doing that once, I didn't want to seriously try to match that pace. The adrenaline was pumping that day. That record was set with my '89 T-Bird SC. I haven't owned a car since that I could ever think of getting back up to that speed. The '96 T-Bird didn't have a chance because of the lack of the supercharger on the same engine as the '89 possessed. I have too much respect for my Sebring (well earned respect mind you) to try to tach out in any sort of attempt to compare with my personal record. Also, I think the horsepower to weight ratio is just wrong to put out some real competition with the SC on this hill. Yet, it will still allow me to comfortably pull ~45+ MPH around the bends.

If anyone else has any twisty or tricky roads to share, I'm all ears.

Read More......

Saturday, August 23, 2008

Driving Rant - Driving Amnesia

As the first rant in the series, I would like to discuss something that I have a bit of experience with while driving. I like to call it driving amnesia. This is a situation where you are driving and you have several miles under your belt and you suddenly don't remember getting to where you are at. You can't remember all if any of the details of a segment of your trip.

I'm not saying that you forget everything about every the trip you are making, however, there are holes in your memory that cause you to say, "Wow, I didn't realize I was was this far along." An alternative statement might be, "Hmm, how did I get here?" Or my all time favorite from a passenger, "Where are you going?" and you realize that you are not going in the wrong direction because "auto-pilot" kicked in.

As soon as I had decided to leave the radio off, I consciously decided to not slam any brain cells against any of the projects that I am current working on. I have learned in plenty of previous situations that driving amnesia is much more frequent with these topics. Thinking of code and development concepts requires so much concentration that the events that transpire while flying down the road are discarded before they can be committed to memory.

I have not ever had an accident during one of these mental states, however, I'm pretty sure that it can't be safe. I have recently begun trying to actively avoid allowing the driving amnesia from occurring. In the past, the radio blaring with development project contemplation has almost certainly lead to the forgotten miles under my wheels. Lately, almost any time that I am on the road, it is for a distance. The last thing I need is to allow myself to be whisked into a state of mental occupation and disregard what is going on in front of me. With a monthly pilgrimage north to Greenville and the less frequent travel to Pittsburgh, my trips are far from short.

I have thus far in my life taken for granted that I can safely multitask while driving. Generally people like to blame external items like food, drink, cell phones, iPods, radios, flat panel displays, or even GPS units for taking a driver's attention off of the road. However, I will tell you that the internal distractions can be just as worrisome. Driving is not an act to be taken lightly. If you really think about it, it doesn't take much of a distraction to get into a bad situation that could result in the loss of life. If you take for example that my average driving speed from home to Greenville is often at or above 80 miles per hour, it wouldn't take much at that speed to get into that bad situation.

Something as simple as an inconsiderate driver cutting me off when I'm in my head could cause my reaction time to be impaired. How about something else that could be a little bit less out of my control. What if I were to blow a tire or encounter a suspension or steering assembly failure? What if it wasn't my car, but a car in my vicinity? Either situation would likely lead to a catastrophic ending. In an emergency, reaction time could be the difference between life and death when you're going that fast. Sure some of you may say that with that much speed, the worst can be assumed. You may be right, but do you want to take that risk? I don't think I want to.

Another thing to take into consideration is when you are driving on a trip to be considered interstate. One should generally have enough experience in the vehicle to readily identify what are normal sounds and what are sounds that should raise concern. Since I am always driving my own car when I drive solo interstate, I can easily recognize the good and potentially bad sounds in my car. However, if I were to allow myself to zone out in deep thought, any attempt of my car to give me warning signs about problems could easily be missed. For that matter, cruising down the highway blaring my radio could have the same effect.

So, in conclusion, I am admitting that I have a real tendency to not pay enough attention to what I'm doing when I'm driving. I am also saying that I am going to try to become better at applying enough focus on my driving that I don't end up forgetting how I got to where I am at. I would also like to challenge everyone else to pay more attention to what they are doing while behind the wheel. I know for certain that some people are worse at this than I am (I've never run a red light because I treated it like a stop sign, although, my record is far from perfect). With that, I shall close this first topic and await the responses from you, my reader.

Read More......

Friday, August 22, 2008

Driving Rant - Introduction

As I eluded to in my prior post, Pittsburgh - There and Back Again, I am going to start a series of rants. Most of the topics are about driving in one fashion or another, however, some of them began at driving and just happened to run from there. At this time, there appears there are going to be eight subsequent posts to this thread, although that is subject to change. I am already looking at two more round trips to Pittsburgh in the foreseeable future. There is a weekend trip planned on the last weekend of the next two months. Who knows where this topic can go with an additional 45+ hours pending in driving time.

So, you may be asking yourself, where did all of these driving topics originate from? Well there are a couple of simple decisions that result in quite a unique situation. The first of the decisions was to drop the roof in my convertible for the drive home. I like to have my roof down as much as possible. Thus, this wouldn't seem to be an unusual situation. Well, you are absolutely correct, however, what follows the roof being down is that the volume required for the music to be heard comfortably over the rush of wind is higher putting more strain on the amp. Additionally, I was driving during the day. Daylight driving is considerably hotter than nighttime driving. One last point is that this trip I transported my golf clubs. Therefore, they were chilling in my trunk in very close proximity of the 4-channel amp.

This amp is known for cutting out, so when it decided to shut down, it was no real surprise. However, the entire drive to Pittsburgh was done without the amp shutting down. But you need to keep in mind that the conditions were completely opposite. Roof was up, volume was lower, and ambient outside temperature was lower. Yes, the golf clubs were there also, but I'm not sure how much of an impact that they have on the whole equation.

Ok, so now you are thinking, why did the amp shutdown just because the temperature was higher during the day. Well, AB class amplifiers are much less efficient than say a class D amp used for driving sub class speakers. AB amps have to be much more sensitive to frequencies and volume changes in a much wider spectrum than a class D amp. So, since they are less efficient, they generate more heat. The more heat generated, the more potential damage that heat can do over time. Therefore, the manufacturer of the amp put in a temperature sensor to protect the amp from destroying itself or worse if it were to get too hot. Therefore, to protect my equipment and my car even, I am glad that it shuts itself down. However, when it does it, it is quite an annoyance.

I have also noticed when the amp shuts itself down, it has a tendency to only perform for as long as it has been shutdown once the cycle begins. Therefore, my intentions were to leave it down for about an hour. Well, after a while of having it down and spending a bit of time in my head, I decided to just leave it down and see where I end up while in my head.

One of the very first things that I notice is that with the radio off I was able to stay focused on a thought longer. Driving doesn't require a huge mental commitment and thus this trip gave me plenty of time to poke around inside the matrix of my mind. The question I am still asking myself is, "How scary is spending an extended period of time in my head without distraction?" I guess it is a question that really doesn't warrant an answer.

As posts are made as a part of this series, I will update this thread as an index.

Driving Rant Posts:

So, one thing that I would like to stress is that although these posts are going to be more of a personal rant, I would like them to be a catalyst to conversation. Please, feel free to comment if you have an opinion on the topic. Yes, these means even if you agree with me.

So, stay tuned, there is more to come.

Read More......

Thursday, August 21, 2008

Pittsburgh - There and Back Again

I will try to make this as short as possible, however, I had a jam packed 3 day stay in Pittsburgh. The fun started on Wednesday when I left my home for Pittsburgh at approximately 10 PM. I reached my mom's house at roughly 8:45 AM. The drive was relatively uneventful. Which, when it comes to interstate driving is just about as much as you can ask for. The only complaint that I can make has nothing to do with the drive. My debit card decided to flake out on me. I don't use it very often, and when I do, it is typically in a POS (Point of Sale) machine. Unfortunately, I didn't know that it was not working in ATMs and when I was approaching WV where there are tolls on 77. I was concerned that I would not have enough cash on hand to pay them all since I couldn't remember the total. As fate would have it, it was about this time that I became convinced that my card was useless in an ATM. I tried a DIP reader, Swipe reader and neither one wanted to cooperate. The only thing I didn't try was a mechanical reader and that was only because I didn't find one. Finally, I found a Walmart in Wythville, VA. I made a $0.93 cent purchase to acquire cash for tolls.

As you can imagine, my Thursday was spent primarily sleeping. I crashed out from between 9:30 and 5:15. Once my mom got home, we left for Dana's apt. I got to spend some time with the boys, my dad, my mom, my nephews, and my brother-in-law. After chilling for a short while, dinner was on. After dinner it was a return trip to Dana's apt and spent some more time with my dad. Once my mom got tired enough, she had me take her back home. At this point it was after 10 PM. Therefore, I tossed on the Olympic games and caught Phelps' 7th gold medal win. Following Phelps' performance, I decided that it was time to do something else. Off to the Beehive I was with Tom. We dropped over $10 in quarters in the pinball machines and closed the place. We then played some ping-pong at Dee's and closed them down. From Dee's, we drove up to the West End Overlook and I ran my stereo through its paces for Tom. Well, once it got after 3:30, we called it a night.

Once back to my mom's house, I asked Dana to have me awake around 9:30 so we could go to the mall. Ironically, that didn't happen and it wasn't my fault. She decided to go to sleep after work and Dad had issues waking her up. I woke up on my own at 10:45 and by the time I was done shaving, Dana was present. I finished up my SSS routine and we headed to Dicks. I'm not going to recap the skate purchase debacle since I covered that in a prior post. However, once I was done getting my skates purchased, we headed to Scalley's to use the driving range and Par 3 course. Tom and Erin met us there. Dana's performance on the driving range was less than promising. However, once we got on to the Par 3 course, she kicked some ass. She actually shot better than I did after the 9 hole course. She'd never played anything harder than the Pitch 'N Putt before and she beat me. Well, never-the-less, I didn't care. I just needed the practice before hitting the links at Village Green on Saturday.

To round out the excitement for Friday, the night was planned to have a Munchkin free-for-all. We had a table of 5 to play, what we expected to be several games. To our surprise, a single hand of Cthulu Muchkin took us 3 hours to play. So much for an approximate 60-90 minute game play. I am starting to notice that the number of players is a more telling metric than the number of decks being played. The last time we played as a group in Pittsburgh, the game lasted forever and we were playing Bites and Star. This time we thought that a stand-alone deck would speed things along. Furthermore, I thought that with the alternate "Cult" rules that the game would more along faster. Well, we were surprised once again. After the game was over, Exile & Darkace headed home and the rest of us hung out for a few more hours before calling it a night.

Saturday started much too early. I headed out of Josh & Lisa's house by 7:40 to get the festivities started. I picked up Justin, he wasn't ready (not a big surprise, really), and then picked up Tom. I was surprised at how much trouble I had getting 3 sets of clubs in my trunk again. I figured that I already had done it before, doing it again wouldn't have been a huge deal. Man was I wrong. I don't know how much time I killed trying to get the trunk packed. Even then, we had to take some clubs out of Tom's bag because they were too long. Well, once we got the clubs in the trunk, we headed to Burgettstown. We got to Mike's place at about 9 AM and our tee time was at 9:30. I guess we took our buffer a little too much for granted. When we were supposed to be on the tees we got to the clubhouse.

Immediately following my entry into the clubhouse, a problem develops. My debit card for my primary checking account is MIA (yes, the same one that wasn't working in ATMs). Well, to make this part of the story short, at Scalley's, I put the contents of one of my pockets into my golf bag. Included in this pocket was my debit card. I didn't find my card until I dropped Tom at home much later. I was surprisingly calm about the situation. The way I looked at it, if I had lost it, the person that was going to try to use it was in for a challenge. Anyway, if it were lost, I could call it in before too much time elapsed. But that wasn't required since I did relocate it a bit later in the day.

Don't worry, I'm going to going to detail the outing hole by hole. I will say that my drives were on for as much as I can be on. On average, I would say that I was driving 230. I think my best drive peaked out at 270ish. Now, if I could get my drive to skip the slice, I think a straight flight could get me around the 300 mark. Unfortunately, I don't play enough and doubt I'll ever get that good. Conversely, my putting sucked as usual. It was very few and far between that I got away with less than 3 putts. For some reason, I just can't read the greens. Either I can't get the angle right or I hit the ball with the wrong power. I will say that for me I had a generally good day. I finished out the day with a 112 with only one hole at a 10 stroke. That hole was a really bad one where I just could not get my PW to get the ball on to the green. I was either short or I would fly the green. I guess I need to spend some more time working on my short game. Tom won the day with a 105 and Mike finished slightly ahead of me. I can't remember his score. However, Justin finished with a miserable 140.

Once I got Tom & Justin home, it was time to find out what I would be doing for my Saturday night, of which needed to be an early night. I ended up meeting up with Tyler and Randy for some bowling at Nobel Manor. Between Tyler and I, we put down 7 games. We both were using house equipment. Although, technically I had the advantage (Ty is still going thru physical therapy from his wrist surgery) I was still having a hard time beating him. My best score of the night was a 200 even. Randy met up with us later and put in 2 games with us. It was a good time. It was great to see them both again. For that matter, it was great seeing everyone while I was home. Well, after I completely obliterated any usefulness of my right hand we called it a night.

Using house equipment after throwing a fingertip hook for so long was an experience. I left there unable to put my right hand ring on. As of this writing, I am still unable to put it on. The hole span was too short and the finger holes were too large thus putting major pressure on the top middle knuckles of my middle two fingers. Also, using plastic balls on oily lanes required massive RPMs at a slow speed. After putting down 7 games, every muscle in my right forearm was screaming for mercy. Therefore, as I eluded to in the hockey post, my right arm and possibly some of my back pain was from bowling. The rest of my discomfort was from playing 27 holes of golf in 2 days. I already know that golf does a number on my back. Needless to say, the past couple of days since Saturday has been interesting with the amount of pain I've been in. Oh well, I had fun and life goes on.

Sunday started bright and early at 0630. Amazingly, my mom had no issues waking me up. By the time I got myself together and my car packed up, at 0700 I was on route to breakfast. There, I met up with Dana, Derrick, DJ, Camren, & my mom. We had a good breakfast and to my surprise, my mom didn't get all emotional when it came to me actually leaving. By the time everything was all said and done, I was on the road finally at 0900.

The drive home requires some discussion. Yes, I made it home safely and without incident. However, the drive home was drastically different from the drive north. With the higher ambient temperature and having my roof down meant more heat in my trunk. Therefore, before I could log 200 miles, one of my amps went into temperature protect mode and shut itself down. Well, my initial intention was to give the amp plenty of time to cool down before I fired it back up again. However, after an hour or more, I decided that I was enjoying the time in my head. Therefore, from early within the WV segment of my drive until I arrived at the rink for my hockey game, my radio was off and this left me to my own devices.

I'm not going to get into detail on the things that I spent thinking about during the drive here. I am going to put together a series of posts with the underlying concept of driving rants. I'm not sure how well I'll get to keeping the series out on a periodic basis, but they will all come out sooner or later.

Short of spending the trip in my head, the only things to note would be the traffic that I encountered in SC. As soon as I was thru the border into SC the entire highway came to a stand-still. It took us about 20 minutes to go 2 miles. That was about all I could take. I took exit 100 and found a way around the traffic. The traffic was being caused by an accident that happened at mile marker 93. Between the time I spent in traffic and the time spent in the detour, I had exhausted all of the buffer time I had allotted myself to get home in time for my hockey game. I literally made it to the rink with 20 minutes to get into uniform and suited up in my gear. It was just long enough. I was able to get all of that accomplished and left me with about 5 or so minutes to skate around for the first time on my new wheels.

Between the drive, traffic, and hockey, I ultimately got home at just after 10 PM. What a long day that turned out to be. I'm glad that I was able to do this trip solo before having to do it in tandem. I was able to find out why my baseline is for the trip during the day since I am typically a night driver and if I were to have run later, would have been able to push harder to get home faster without any "feedback" from a passenger. So, in the next 2 months when I am doing this same trip again, I know with relative certainty what I will have to do to get home for my other games.

All-in-all, it was a good trip. I had tons of fun and had a blast hanging out with everyone while I was home. It is weekends like this that really makes me think about what I'm missing since I've moved. It is a shame that I am so introverted. I should be able to create a network that is more local that would allow me to have similar weekends in a more local proximity. I guess time will eventually correct this. However, that would require that I get out of the house more often. I'm really hoping that sports will grant me this opportunity.

Read More......

Monday, June 30, 2008

Financial Update

For those of you that have been keeping tabs on what I've been writing here, this topic should be familiar. Otherwise, suffice it to say that I've come into a bit of a windfall in the past couple of months from several separate sources. If you would like to review those details, you can feel free to review my prior posts entitled "Signed on the dotted line..." and "Mine, All Mine - Officially"

Well, all of the windfall has completed its journey in reaching us. This money has also finished its destination in being spent. As I have previously posted, my car is paid off. Well, in addition to my car, Angel's car is in the clear as well as my teeth. Yes, my teeth. Right before the wedding, I had some pretty extensive dental work done and took out a line of credit to make payment to the dentist.

Suffice it to say, we have quite a bit of extra money available on a monthly basis due to this debt clearing sweep. Unfortunately, the desired outcome of this activity was not immediately realized. My expectations from clearing these bills was to have additional money to clear out our debt on my credit cards that I have in my name for a home improvement, getting my car fixed, buying our house, and expenses from the wedding. Well, an underestimated debt came due. Angel's student loans.

Her loans came due in April. We had a enough money available at that time to make what we thought was the payment amount, a hefty $500. To get thru May and June, we used our economic stimulus check from the government. Then, to make matters worse, the previously assumed monthly payment of $500 was incorrect. We were later notified that it would be in the $725 ballpark. Well, right now, that is just not working properly into our budget. Therefore, we have since requested a forbearance for her student loans.

At this point, you may be asking, why get the forbearance? Well, student loans are a long term debt and they generally have a relatively low interest rate. While we can theoretically afford to make the payments to her loan and maintain the rest of our bills in a satisfactory status (according to the creditors); I find this to be a problem. To take our windfall and maintain our financial status quo is troubling to me. Therefore, the time we are seeking in forbearance will be used to pay down our other debts. Will it be long enough to pay them all down? I don't know, but I know that it will be enough time for two out of the three.

As it stands today, we have a 6 month forbearance with the ability to extend for 6 more near the end of this period. I desperately hope that in this first 6 month block of time that Angel will not only graduate from school, but also find a job in her field to accommodate the payment for her student loan. However, as always, time will be the dictator that will eventually reveal if these recent moves have been the right one or if we're just pissing in the wind.

Read More......

Tuesday, June 3, 2008

Mine, All Mine - Officially

Well, that money that I mentioned has finally come to fruition. All of my bonuses have been collected and it is time to distribute the funds. As of approximately 1120 today, my car, my 2003 Chrysler Sebring Convertible GTC 5-speed is mine in title.

I contacted my creditor this morning and told them to pay it off. She is mine. In a few short weeks, I will be receiving all of my pertinent paperwork regarding this loan. The paid in full notice, the account closed notice, and my title will appear via the mail in their due time. The process of removing the lien from the title doesn't yet happen over night, so I presume it will be somewhere between three and eight weeks until the title reaches me. The remainder of the paperwork will either meet me at home or will be there shortly after I return home.

Even though I will have the title in-hand, I will remain paying on her for just a little bit longer. Remember when I blew-up my transmission? Well, that debt is still outstanding (the account is current, but is an outstanding debt that I carry). However, this remaining payment on my car is not against my car. I paid for that situation on a credit card and it is at a very low interest rate with a moderately low monthly payment. Therefore, that payment shall continue for a little bit longer and I will have my title.

Read More......

Sunday, April 20, 2008

Alabama Trip - Friday and Sunday - MECA Car Stereo Competition

The intended purpose of the weekend was to attend a MECA Stereo competition in Alabama. This intention was almost compromised. It was Thursday afternoon that I was informed that my amplifier had been shipped to the wrong location. It was shipped to Pittsburgh to TNT instead of directly back to me. After some phone calls and further consideration, it was determined that the amp would be overnighted to me from TNT with someone else paying the tab. It wasn't my mistake and I wasn't about to pay for it.

With this development, I was very happy that I had taken Friday off of work. I was going to need all of the time I could find to get my car prepared both for the trip and for the competition. I was up very early on Friday. James was in town for work and had crashed at my place so that we could hang out for a while. I had to have him across town for 9 AM. It was great to have had this opportunity and it also played well into my plans. Since I had to be up to get him to work, it also assured that I would be awake once my FedEx delivery would be made.

All of my activities for Friday, minus packing, revolved around my car. I was preparing a installation booklet outlining the equipment in my car and the effort associated with it. To complete the book, I needed my car complete. I had received my speakers on the previous Friday, so the big wait was all about the amp. The amp was delivered at approximately noon. From that point on, it was a rush to get it tested, photographed and finally installed. Angel got home shortly after 2 and I was just wrapping up the final details of the installation. It took me roughly another hour to get the booklet completed and then it was time to get the packing done.

So, you might be wondering, why didn't I pack between getting home and getting my delivery. Well, it was anxiety. I couldn't focus on packing when I was preoccupied by the work that would follow once my amp did arrive. Therefore, after a quick pack job and loading up the car, we were off around 4. The first stop on the trip was to Kinkos to get the booklet printed out. Everything was already set in a file ready for printing on my thumb drive. Kinkos just had to print and bind it for me. The booklet was comprised of 5 printed pages with a clear front and back. Once the 5 pages were printed, I used their paper cutter and handed them the document back to be bound. With covers, it turned out to be 12 pages and it was spiral bound.

With all of this done, it cost a mere $13 out the door. I can't imagine what it would have cost if I had asked for someone else to do the prep work. Unfortunately, once I decide to change the configuration or add new equipment, I will have to re-do it to some degree. I guess I would have been better off using 8.5 x 11 pages with a 3 hole punch instead of the 8.5 x 5.5 spiral bound pages. This would have made it a bit more flexible. Anyway, it is unique.

After getting the document printed, cut, and bound got us on the road at 5 PM. You can read about the drive in the other Alabama trip post. Another touch on the preparation for the trip included a two day car washing effort. I took the car on Tuesday to a DIY car wash to get her clean and didn't finish off with the liquid wax. Wednesday was the wax job. I found a new tool that I thought would be interesting to try. I picked up a Mother's Power Ball.
It came with a bottle of liquid wax, so I gave that a shot too. Typically, I like to use Mother's Gold paste wax and do it within direct sunlight so it gets very hard and shines marvelously. So, a liquid wax was a new effort for me. In using this new "toy" and liquid wax, I tore through 4 drill batteries just to get the car waxed. I either have to apply this stuff by hand next time or get more batteries so that a lull in the action doesn't happen again. (I had to wait for another battery to charge before I could finish completely.)

So, the drive to Alabama did a number on my wash & wax job. I had expected some degradation of the job, but the number of bugs that were collected on the front bumper and windshield were horrible. Even after a quick wipe down on Sunday morning, there were still bugs left over. So, the drive from Huntsville to Boaz was a bit more exciting than I would have liked to find. The directions that I pulled up terminated about 15 minutes short of our destination. Another word to the wise, double check the location that a mapping service pulls up for you before printing and leaving. The address that Google Maps grabbed for me was not correct and created a brief but stressful situation when we landed in the wrong location.

So, the flyer for the competition event sponsored by Wild Bill's Electronics in Boaz, Alabama indicated that registration started at 9 and that the competition judging would start at 10:30. Well, I don't know what judging started at 10:30, but it certainly wasn't the sound quality judging. Anyway, we got there at approximately 9:30 and had our area setup and registered by 10. I entered into two competitions, Sound Quality (Amateur bracket) and RTA Freq Out. You can find the specifics about these two events in the rule book, but I will gloss over the events to save you some reading.

The objective in the Sound Quality (SQ) event is to have the most realistic reproduction of the selected competition material as possible. This reproduction includes staging as a criteria. The term staging represents that all of the frequencies appear to originate from in front of you. In the amateur class, this is all that is important, however, in the non-amateur classes there are more aspects such as direction (center/left/right), height, and width. There are many more criteria, such as system noise, frequency response, linearity, dynamics, and ambiance. The system noise check can only reduce your score, not enhance it. Frequency response is in regards to the clarity and ability to reproduce the frequencies with accuracy. Linearity is in regards to how the frequency response reacts to volume changes; are the frequencies reproduced equally at different volumes? Dynamics are in regards to the ability of the system to accurately reproduce the high and low volumes within the material and ambiance is the ability to reproduce the size and space of the environment in which the music was recorded. The rulebook gets into more detail about how to score each of these areas.

So, since I am in the Amateur class, I am scored on a 70 point scale and scored a 49.5. The winner of the event scored a 54.5. My score put me into 3rd place and was awarded a trophy for it.

The RTA Freq Out event is based on how the system reproduces each frequency range. Pink noise is used to hit all of the frequencies at the same time. A microphone and electronic meter are used to display how the frequencies are being played with an EQ readout. The objective of this event is to have a flat line response across all frequencies. This event is scored on a 40 point scale. My system scored a 27 and the winner scored a 32. This performance was good enough to place me in second of two. Once again, I was awarded a trophy for this event.

Before I get into what can be improved, lets talk about the last award that I received. I was awarded the SQL Most Improved. Typically, this award goes to the competitor that has most improved their system from one competition to another. Therefore, since this is my absolutely first competition, how can I be considered for this award. Well, the reason for this was because of the clinique. MECA league members are able to take advantage of a system review by the judge prior to official judging. Of course, since this was my first event, I certainly took advantage of this offering (I became a MECA member when I registered for the event).

After the clinique, the judge brought to my attention that I was missing some frequency reproduction between my door drivers and my tweeters. Those frequencies are controlled by the passive crossover network. This was not an active crossover or an amplifier controlled area. Therefore, I knew that the only way to change it would be to hit the crossover type control switch inside the passive crossovers. Once the judge came around for the official judging and finished my car, his comment was to the effect of, "that change made your system sound like a completely different car". Between making that major of a change and the fact that this was the first MECA event in the area for the year, they made the exception to the rules to award me with the honor.

Event Results (Be sure to click on the SQL Results link).

My Score Card:


Event picture album.


So, what did I learn during this experience? Well, the first thing I figured out is that in order to improve my performance, I have tons of work to do. I had the opportunity to listen to some of the other competition vehicles (including 2 class winning vehicles that scored 80+ each) and I have a long way to go to get close to that score. The points that I have immediate control of to improve for the next competition is tweeter placement and front stage adjustments. I was told that the stand-up bass was imaging in the rear rather than the front. This will be a simple crossover change for the next comp. Also, to improve my ambiance score, it was recommended that I put my roof & windows up. I don't know if it will hurt or help me to do so. Having the roof & windows up will introduce more surfaces for the frequencies to bounce. It is my opinion that right now, my system sounds better open than closed. I guess will have to wait until I can attend another comp to find the answer to that one.

There is one more major thing that I can do to improve the performance of my system. The RTA Freq Out pointed out to me that without an EQ, there is very little that I can do to make major improvements. Unfortunately, based on my system design, my options for an EQ are very limited and are very expensive. I did some searching at some of the major player websites and have concluded that I have three options.

EQ Installation
Zapco DSP6-SL & DRC-SL processor ($1,000)
Audio Control DQS ($499) and DDC ($180)
Alpine PXE-H650 ($450)
Alpine System Overhaul.
iDA-X200 - Digital Media Receiver ($300)
PXA-H100 - IMPRINT Audio Processor ($180)
KTX-100EQ - IMPRINT Sound Manager ($250)


After further review of the KTX-H100EQ is not the same as the required add on of the KTX-H100 required for the PXA-H100 to be used. This cost should be less than $250.

At this time, I am not sure as to what solution I am going to take. The two Alpine units (stand alone EQ or system overhaul) look appealing. However, I am not sure I want to cross the line into a realm that is a slippery slope. The Alpine components are known to inter-operate with themselves the best. I don't have the cash or desire to replace my amps also. If I had to pick right now, the Audio Control unit would be the one I would buy. However, I think more research will be required.

Also, while at the competition, I was able to talk directly with the owner of a sound quality based stereo shop in Atlanta. Granted, the shop is about an hour from home. It is such a relief that there are some shops in the ATL area that I can rely on with questions and part requests that will know what I'm after. With the addition to this ship, I now know of two shops with which I can obtain assistance with my car. The other one is much closer, but they don't compete anymore.

I'm sure now that I've successfully completed my first competition that it won't be my last and that the progress with my stereo is far from done. Even if/when I get my car to a point to call it complete, there is still Angel's car to be dressed. I'm sure that will provide just as much if not more updates in the future.

Read More......

Alabama Trip - Friday Evening thru Saturday Night, including the "White" Wedding

So, this past weekend Angel & I made a trip to Alabama. The adventure of getting there was interesting. The week leading up to the trip was more exciting than it should have been. However, majority of those preparatory tasks were car related, therefore, I'll save you the details for the car post. For that reason, I'll fast forward to Friday.

I had taken Friday off of work, just to be certain that I would be able to tie up loose ends as they appear. Angel had to work until 2ish. I had anticipated that we would have been on the road by 4. Well, I ended up being close. We left the house at about 4:15, except we were not in route until shortly after 5. This ultimately put us at the hotel at shortly after 9 central time. We had encountered a couple of situations that were more time consuming than I had anticipated as I expected to be at the hotel at 9 eastern time (I had forgotten about the timezone change).

When the timezone change was realized, this produced an interesting response. Angel was using my phone to read a text message and noticed that my cell phone clock was an hour before my head unit clock. She immediately accused me of not fixing my clock, but I knew well better that it had been correct when we left the house. Therefore, the only remaining reason for the difference was switching time zones.

Well, I had been keeping tabs on the weather before our trip. I knew we were going to be driving directly into an approaching low pressure system that was producing some serious rain. However, when we were leaving it was such a beautiful day, I couldn't bear to drive with the roof up because of an imposing rain situation. Therefore, as I'm sure you can conclude, we got wet. At first it wasn't so bad. The windshield was getting wet, but we were chilling dry. I was hoping against hope that I could make it to the next rest stop to put the roof up. Well, this was not going to be the case. We had about 4 miles to the next exit (though we didn't know it because the billboards only said "Next Exit" not what exit number). We got about two miles closer before the cats & dogs started to fall. There we are, on the side of the road and sitting at a dead stop trying to close up the car getting much, much wetter because the road speed wasn't creating a wind buffer to swish some of the water away. Yes, we were drenched by the time we got the car closed.

Then, even though the car was closed up, we were still getting wet because the side rails were wet, the rubber surrounds were wet and holding some of the felled water. This meant that water was pouring in on us from the window area. Thankfully, I had grabbed a towel for a quick Sunday morning wipe down that was easily accessible and was able to dry the areas wetting us further. Once we got back on the road and to the rest stop we wiped down the rest of the car interior so that it wouldn't spot or contribute to the humidity in the car.

From this point on, the rest of the trip was spent primarily in the rain. Due to the rainfall within the car, the air conditioner was required to some degree to prevent fogging of the windows. Thankfully, other than the road side stop, that was as exciting as the trip got. FYI, if you ever travel to Huntsville, review the turns that will be required before you get there (mapquest, Google maps, ect) because some of the directions are really hard to follow without some researched reference.

Once at the hotel and checked in, we were able to find Janette and spent some time with her at the bar until the rest of the guys got back from the rehearsal dinner. It was great to see some familiar friendly faces. The last time that either of us had seen these guys was at our wedding. Additionally, it was excellent to finally meet Randorushiro in person. We had been introduced via Exile and had collaborated a bit on some code. Unfortunately, he has since dropped out from the project, but we stay in touch.

The bar closing is what got us moving in our respective directions. I still don't understand why hotel bars close at 12, but they do. This didn't sit well with the younger crowd and they continued to drink in one of the rooms well into the night. I had called it a night when I got to the room. I had not expected this to be the case, but I was more tired than I had realized.

The next day was the wedding, the "White" Wedding (their last name is White). With the event starting around 3 and we met in the lobby for 2:15, I was expecting this to be an all day affair. It was a surprise when it was not. More on that in a bit. However, the drive to the location was certainly notable. Remember, we are in Alabama, not West Virginia. However, the trip up to the lodge was uneventful, but interesting. The trek began with a short jaunt down the highway. From there it was an accent to the top of a small mountain or a large hill. The first indication that this would be interesting was a sign that indicated large vehicles and vehicles with trailers were advised. I was having a hard time understanding what this meant. Though, with time, I would know well.

The road snaked up the side of this hill. There were a severe drainage ditch on the right side of the road and what appeared to be a sheer drop-off on the left. The drainage ditch was intimidating. Where the asphalt ended, it dropped into this ditch that would certainly do major damage to the underbody of the car and likely frontal damage (depending on where & how you fell into it) and I don't even want to think about the other side of the road. Then later on, after the winding road decided to straighten out, we figured out what was up with the signs for the trucks and larger vehicles. There were 2 180 degree turns in the road. I can't imagine what a vehicle of any great scale would do with this area. Before I move on, for those that missed the WV reference, they are known as ridge runners. This type of road would be more expected within the WV mountains than in the deep south in my opinion.

Apparently there is a dramatic difference between Northern and Southern weddings. The ceremony was beautiful and quaint. Following the ceremony, the reception did not include a meal, however, finger foods, wine/cocktails, and cake/dessert proved to be more than enough. The whole atmosphere was different from what I've come to expect from a ceremony, but definitely not in a bad way. There was not a DJ present for the reception. The only dancing that was done was between the bride & groom, for their first dance (again, very much fine by me). There wasn't any assigned seating, there wasn't a wedding party head table, there wasn't a best man toast, and there wasn't too much else in regards to pomp and circumstance. Additionally, the biggest difference between a Northern and Southern wedding is duration. I don't recall what time we left the location, but it was definitively still daylight.

I hope that these note points do not infer a negative spin on the day. This was certainly not intended. The whole day was beautiful. The actual wedding ceremony was what was expected, with the exception that Randorushiro's mother was presiding. This ceremony was purely designed for show. The couple have been married for 5 years now. They were wed before he got deployed and was done by a JP. This assertion of their vows was for the families and to have the opportunity to share the event. The reception following the ceremony was very nice as well. Just because something is different, it doesn't mean that it is bad. I am certainly glad that I was given the opportunity to join them.

You can see the pictures that I took of the event below. Address Book.


So, following the ceremony, we returned to the hotel and began our search for dinner. We finally decided to follow a recommendation of the front desk for some good, local BBQ. It was about a 15 minute drive to the location and it was certainly in a rural area. Right next to the restaurant was a grazing field for cows. Man, this stuff was good. Not quite the same as JRs back home, but it was very good. If I could remember the name of the place, I would certainly recommend you to it if you ever find yourself in Huntsville.

After our southern grub, we again return to the hotel. With nothing better in mind to occupy ourselves, we break out Munchkin. With 6 people at the table and only using one deck (Bites), we were surprised how long this one game took. It was after midnight before Angel & I returned to our room. Anyway, it was a wonderful way to spend an evening with good friends. It was an intimate, simple, and quiet way to spend the night. Certainly much better than spending the night in a bar or other nightlife establishment that only 1/2 of us would have had any serious interest. Additionally, with us each crashing at different times, it certainly made the event more manageable for all.

From this point, the rest of the weekend was spent solidly revolving around my car. See that post for the weekend ramp up and conclusion.

Read More......

Saturday, April 19, 2008

Brief Update

This is just a preview post for a few topics that I will be posting following this one with further details. It has been a little while since my last contribution to my blog. I felt that some of the recent topics required a follow-up.

1. Workout - Well, since the back incident, the P90X program has not been resurrected as of yet. However, I pledged that I was going to start running & other preparation for my up coming PT test. Well, that hasn't worked out so much better either. Since my second run last week, I have yet to go again. This past weekend had much to do with that, which lead directly into a user conference for work and then more yard work. Hopefully, next week will bring more disciplined results.

2. Yard work - Yes, the yard work continues. We have well exceeded 40 man hours of work that has been invested in this adventure. Unfortunately, I heard a rumor that rain is expected this weekend and in the event that it does appear, that will thwart further progress there. I'm hoping for a poor meteorological read for the weekend outlook and that I might be able to call the "finding of the yard" complete. See the follow-up post for more information as to what we've done recently and some of the things we're planning.

3. Car Stereo - Well, I competed in my first MECA Sound Quality Competition this past weekend. Lets just say that based on my results I have something to be proud of in my car. However, my creation is not exactly "audiophile" quality yet. Unfortunately, the leap further into that classification will be long in coming. See the follow-up post on the topic for more details.

4. Alabama Trip days 1 and 2 - The early departure for Alabama was credit to the White's. We had been invited to share in the event of a friend renewing their vows. We took the trip and had some notable situations occur in route that will be contained within the follow-up post, but what it boils down to is that the trip was safe, fun, and enlightening. Just a quick note, southern weddings are distinctly from their northern counterparts. However, it doesn't diminish the special nature of the event or the enjoyment of participating, it is just different from what I've come to expect.

So, be sure to check out the additional details on the 3 topics that require follow-up and as always I hope you enjoy this little window into our life together along with our trials, tribulations, and events that we have the opportunity to share with you.

Read More......

Sunday, March 23, 2008

Amplifier Saga Continues

As most of you know, shortly after buying our house, my 600W Class D amp blew in my car. Well, the timing was horrible. After buying the house, this had very little priority to get corrected. Well, after getting the component speakers installed in my car, I figured it was about damn time to take action to get my amp fixed. Thankfully, it was still under warranty and it would only cost me shipping to get it fixed. Shipping only is much better than having to pay retail for another new amp.

Well, if that was the end of the story, there wouldn't be much of a story, would there. Well, there is more. After they only had the amp for 2 days, they had repaired and shipped my amp back to me. Within the shipping, there was not a single piece of paper outlining what they had fixed. They told me that documentation would accompany the return. I'm worried, but optimistic.

Obviously, since not having it hooked up for the past 9 or so months, I'm excited to have it up and running. Once I got off of work, I didn't waste any time jumping into the job.

I did the general continuity testing. Turned down the gain on the amp, turned the volume down on my head unit and felt the speakers for vibration. The first time there wasn't any. I turned up the gain on the amp and still nothing. Well, this wasn't any response for good reason, while I was waiting for the amp to return, I installed the remote gain switch and it was turned all the way down. So I disconnect the switch and presto, speaker vibration. I took this as a good omen and reassembled my trunk.

Before I departed, I did the same test again. Speakers are still vibrating. So, I jump into the car with the volume low (residential area and late at night). When I get to 78, I turn it up. Immediately I can notice the difference.. I have a full bass channel again. Unfortunately, this was short lived.

Once I got home, I left the radio on and popped the trunk. Speaker vibration was gone and a faint waft of smoke coming from the area of my amp. I'm in a panic now. I quickly grab the drill with the Phillips head bit attachment in place and start removing my speakers to I can get my trunk floor out of the way. The first thought that ran through my mind was "My car is about to catch on fire in my garage, ahh!!!" Well, thankfully, once I got into my trunk far enough, I was able to find that nothing was on fire.

The smoke was coming from the electronics on my amp. Damn it!! Anyway, I am pissed now. The power light is flickering and the fault light is on solid. WTF? I thought this thing was fixed. Am I being screwed here? What am I going to do now. Well, knowing that my car was safe, I call it a night. As I am lying in bed, the thought occurs to me, what if there is something in my system causing the problem.

Well, I know that the power is clean. I reran all of the wires personally and know that all of the connections are good and all of the wires are in good condition. What else could blow my amp? Well, my speakers could. I'm running 2 speakers with 4 voice coils (VC) (each at 4 Ohms) to present a 1 Ohm load to the amp. If any of the voice coils are damaged and are not at their correct resistance of 4 Ohms, then that could damage the amp.

I pull out my (not so) trusty multimeter and try to get a reading on my speakers. Well, my meter just told me that there was continuity but not at what resistance. The next day I bought a new meter and it told me a very bad story. One speaker was well and good. 3.9 Ohms on each coil. The other speaker was not so fortunate. VC1 was 1.5 Ohms and the other VC was only presenting a 0.8 Ohm load. I did the math, with these 4 readings, the amp was seeing a .416 Ohm load. Much less than the 1 Ohm load that it was rated to handle. So, now that I know what the culprit is, when I get my amp back this time, I won't make the same mistake.

Unfortunately, with only one speaker and a shared box environment, I don't have a clue what this will do to my fidelity. I do know that I will have to leave the broken speaker in place to fill the hole so that the ported box will stay in tune, but I'm not sure how a passive driver will effect the sound. I do know that running my amp at a 2 Ohm load will drastically damper its capability. My 600W amp will now run at 300W (at 12 volts) I imagine that it will run about 440W at 14.4 volts. I guess that is plenty when I'm trying to enter a Sound Quality (SQ) competition. I don't need all of the extra power and "boomy" base for SQ.

As for my broken speaker, I have contacted the manufacturer (it is out of warranty) to see if they can repair the VCs at a reasonable cost. These speakers each cost between $125 and $150 brand new. Also, the manufacture has stopped making this line of speaker. I am not certain that they will be willing to fix it for that reason. If they won't play nice with me, then I guess I'll run crippled for a while until I can justify spending the money to get it replaced.

More to come in this saga once I get my amp back yet again.

Read More......

Garage Work

Well, now that the garage has been cleaned out well enough to get both of our cars in it at once, I guess it has come to the time to get the doors working for us. Last weekend, Angel went to Sears to see about buying a new remote for the existing opener and while she was there, she put yet another Sears gift card to good use. She picked up another chain drive door opener for our other door.

As with most of everything that I get myself into, this turned out to be more complex that I had anticipated. I thought the major work was already done. I couldn't have been more wrong. I had thought since the header brackets (door and motor side) were in place and the bell wire and button installed that I'd just have to assemble and mount the new opener. Well, to my frustration, this was not the case.

So, I initially started working under this assumption. I got the system built, no problem there. I got the sensors installed and wired, no problem there. However, when I was ready to mount the system, I found that the header on the door side was the wrong width. I'd have to replace the bracket. No problem, the system came with one. I unbolted the existing header, installed the new one. The screw holes were off, but nothing a quick poke with the drill to get a guide hole made won't fix.

Once the door header bracket is mounted, I hook in the bar for the opener and then have to figure out how I can get the motor up, in place, and bolt it in by myself. The system did not come with prefab bars designed to attach nicely to the existing motor header system. Therefore, I take what was provided, L bars with alternating holes down its length and hammer it flat. However, these bars are about three feet long. How am I supposed to cut it? I don't have tin snips or a pair of dikes, so what do I have that will cut it? Well, from working in my trunk, I have a jigsaw that I borrowed from Ernie. This worked wonderfully (after I screwed the bar to a 2x4).

Before trying to hold and screw the motor, I mount the bar to the ceiling bracket. I pivot the motor close to being in place and begin to bend this bar so that it will line up with the motor. After a few shots at this I get the holes to line up. Wee.. now the system is mounted stable enough to see if I have enough clearance. The system is not mounted to the door yet, so I take and manually open the door. Anyway, to make a repetitive story short, I had to bring the system down and put it back up 3 times before I was able to get the door open without hitting the bar. The last time I even had to move the trolley (for manual operation in the event of a power outage) out of the way to reduce the clearance height requirement.

After having the system up and down 3 times, I was in quite the unhappy mood. Anyway, I braced the top of the door with the spare L bar and mounted the system to the door. Please keep in mind, up to this point, I only have the motor mounted to the ceiling with 2 hand tight bolts on one bracket. The other bracket hadn't been made yet because I was not sure the horizontal alignment with the existing bracket was even close.

Now that the door is mounted I gave the system its maiden operation. With some hesitation and excess noise, the door was successfully opened. The real challenge came when I couldn't get the door to close again. After some careful inspection, I found that the lag bolts on the left hand track were loose and the closing of the door was causing it to move and this movement was requiring too much force from the motor to move that it would just backup due to its safety system.

Thankfully, the lag bolts provided with the system were longer than those that were holding the track in place, it was a simple replace. After securing the track, the door would attempt to close and stop with about six inches left to go. Well, I read the manual and I had to increase the closing power of the motor. Several attempts and many adjustment screw turns later, I got the door to close without stopping short or hitting the ground and backing up again.

Now, let me tell you the a couple key details that I left out throughout this entire process. During the mounting process, in order to get the door to clear the bar, I had to put the mounting bracket partially in the ceiling. As I'm sure you can conclude, this also meant that the bar was partially in the ceiling and the trolley was also hitting the ceiling. Therefore, I had to cut a hole in the ceiling close to the bar everywhere things were hitting it. I still have drywall dust falling on my car at this point.

Here are some photos of my craftsmanship.

Read More......

Saturday, March 8, 2008

Right Place - Right Time

I was made an offer today that was just interesting. Amazing if it turns out to be true, but interesting none-the-less. Ever since completing the component speaker installation in my car, I have been looking into possibly competing in a sound design (quality) competition. I think that the performance of my stereo is noteworthy and I would be interested in entering my car into a competition just to see how it is appraised. Don't get me wrong, the quality of my car is likely not going to be award winning as it is now. The guys that compete in the MECA circuit take their audio very seriously.

I have taken the time to read the rulebook for MECA and don't think I'll place highly at my first go of things. The things they are looking for in the performance of the system are very specific. So specific in fact that I don't think I have enough time, money or proficiency yet to be on their same level.

Let me quantify for a moment as to why I say this. Some of the aspects of the system they are looking for is realistic representation of the sounds being played. They are looking for correct locational representation of the sounds (front, back, left, right, center). Location of the sound is what is called the soundstage. The soundstage is supposed to represent being in the presence of the group to which you are listening. The difficult part of this is the generation of the mid, low mid, and low frequencies. Typically (and in my car) these frequencies are dedicated to the back and trunk speakers. How in the world do you manage to put those sounds in front of the listener? That I don't know and am anxious to find out.

Interestingly enough, one of the things they are looking for (which I do have) is an explanation of the equipment and purpose of the equipment in the system (as you can see from the folowing list).

Once I have my system completely reassembled, my system will comprise of:

  • Speakers:
    • PowerBass Extreme 3XL-6C Component Speakers 3 Ohm set
      • 1.25" tweeter (two)
      • 6" mid range driver (mounted in a Car-Speaker-Adapters.com provided universal 6X9 to 6" adapter - two)
    • Audio Art 3-way 6x9 full range 4 Ohm (two)
    • PowerBass Extreme ES 10Dv.2 Dual 4 Ohm low range (subs)(two) 10" speakers with each coil wired in complete parallel presenting a 1 Ohm load

  • Signal Processing:

  • Interconnects
    • RCAs
    • Power Wires
      • Rapter 4g wire battery to battery w/ 60a fuse link
      • Rapter 0g wire (battery to fused power distribution)
      • Rapter 0g wire (battery to chassis)
      • Lightning Audio 4g OFC wire positive (fused distribution block to class D amp)
      • Rapter 8g OFC positive wire (fused distribution block to class AB amp)
      • Lightning Audio 4g OFC wire negative (both amps to battery)
    • Speaker Wires
      • Speaker wire for sub speakers, Rapter 12g OFC and Rapter 16g OFC
      • Speaker wire for rear speakers, Rapter 12g OFC
      • Speaker wire from 4 channel amp to passive crossovers, Rapter 12g OFC
      • Speaker wire from passive crossovers to speakers, Lightning Audio 15g OFC
    • Other Interconnect Devices
      • Optima Red Top secondary battery
      • Blackmore Blackice IFB-12M Fused Power Distribution Block
      • Mc Laren Sound Systems MLF-80A AFC fuse (two)


On top of all of that equipment, I also have a CompuStar 1W900FMR security system installed with the remote starter (noted because I am driving a 5-speed). A custom built and installed sub box with 1 cu foot of volume per speaker and a rectangle port tuned to 60 hertz (I think, I'll have to double check that one) in conjunction with an amp rack. In reflection, this is a ton of after market equipment in my car. I can't and won't deny this claim. Thankfully, I didn't try doing all of this all at one time. This has been a project in the making for several years and I'm not certain now that my dream design is complete that I'm done.

If the competition bug sticks this time and I take up these MECA Sound Quality competitions, I can see additional equipment in my future. The first two things that come to mind include a massive amount of Dynamat and an external equalizer. I was looking around today at EQs, while I was out, and wasn't able to find anything exciting, however, the prices seemed promising. Although, I was just looking at Kicker and Clarion. I have a feeling when I do find that which I'm looking, it will be higher grade and more expensive.

Anyway, enough about my car. Lets get on with where this story was headed.

Well, regarding the rulebook, I realized that my wiring didn't meet the requirements. There were not any fuses between my secondary battery and my amps. This was not my fault. When TNT installed my custom box, they removed the fuse block that I had in place. I don't know why, but they did. Therefore, if you look at my list above, I have purchased and will be installing a new block & fuses into my car. This purchase is what prompted this discussion.

So, I was doing some online research about the block that I wanted to purchase. During this search I kept finding StreetWires as the manufacturer that created a product hat I could use. Using their dealer search, I found a shop over by our old apartment that might carry what I needed. After making a call to the shop and finding out their hours, I reluctantly made the trip over there. As I had expected, the shop was less than useful for the parts that I needed. However, while I was over in that area, I decided to stop over at a shop that I swore that I wouldn't again patronize.

The last time I went to this shop, the guy running it was so rude that I never wanted to go back there. For instance, I asked them if they carried Crossfire and he said no, but go check at Best Buy to see if they carried it. I wanted to scream. There is no way that Crossfire would ever certify the installation shop for Best Buy to install their equipment. Also, Crossfire is too expensive for the typical shopper to purchase at Best Buy. Crossfire is just too high end. To further my aggravation with this shop, I had inquired about getting my fog lights installed. To my surprise, the guy claimed that they don't get into electrical work. I was floored. It is a stereo shop which is natively electrical. Also, I didn't bother pushing the point because his attitude was so bad, I was done with them.

However, I decided to give this shop another chance and am I glad I did. They had everything that I was looking for today and more. I purchased the 1/0G wire, battery terminal, fused distribution block and fuses from them. While I was there, I got to talking to the guy. I came to find out that he's the owner of the shop. I was asking about any known local competitions though he didn't know of any. I also mentioned my intention of attending one of these competitions in Alabama and apparently the wheels started spinning for him. He also agreed to check out my car. After checking out my trunk (not hearing it) he made me the offer. After hearing my interior 6 speakers he emphasized the offer again.

So, Victor from eXtreme Car Audio (5045E Singleton Rd. Norcross GA 30093) said that he would do some Dynomat work just to put a sticker on my car at a future point in time. If he is serious about doing this that would be some crazy expensive work done on the cheap. I don't know if it will come to being, but only time will tell. Also, I'm not certain the extent that he is willing to Dynomat for me in this deal. Regardless of just the truck or my trunk and interior it will certainly save me some serious dough. With how friendly he is and if he keeps his word, I can certainly see a mutually beneficial partnership here.

Anyway, any future interaction is purely speculation at this time and how "deep" his discounts are will greatly sway what I can and will do with him. I'm not looking to spend another $2k on my car stereo but there are several things I can see myself getting into depending how this comp goes. Don't get me wrong, I really enjoy the way my system sounds right now, but better is always good. An additional constraint will certainly be the checkbook. More equipment, features, perks, or modifications to my car will all cost money. I have to make sure that we're focusing on our futures before I can play with anything more. My bonus with my re-enlistment with the army will make that decision almost immediately.

Edit: 3/9/2008 5:15 PM
Reorganized the parts inventory and added the Monster RCA cable set.

Read More......

Monday, March 3, 2008

AAR - Component Speaker Installation

For those of you that are not militarily minded, AAR means "After Action Review". I would like to break down the good, bad & areas that would require improvement in the future (should I ever do this again for whatever reason). This is meant more as a message of closure than a true AAR, but well see how it turns out once I'm done.


  • What was the task being executed: Installation of component speakers into my car (With a subtask to fix my passenger front seat).

  • Who was executing the task: Me.

  • What happened: Speakers were installed in my car.

  • What went well:
    • The speakers were installed with as much attention possible payed to the acoustic and practicality designs taken into consideration.

    • The car was disassembled and reassembled in a timely fashion (I met my deadline of having my car ready for next drill.)

    • The car is 100% functional after being reassembled

    • The passenger seat is now able to be adjusted front to back as required at the whim of the passenger.

    • An additional subtask of installing seat covers was completed during the state of disassembly.

    • One of the results expected to be obtained in the installation of the component speaker set was to shift the soundstage from the center of the car to be in front of the listener.

  • What went poorly:
    • A interior piece got broken due to negligence during the installation process. (Driver's side sun visor clip)

    • Lack of attention lead to the exclusion of a dashboard item from being reinstalled (not really a negative as I wasn't going to put the 6 disk changer back, however, I was anticipating on replacing the shroud for it anyway.)

    • Due to poor planning & tunnel vision one of the tweeters were installed in a less than favorable aesthetic method. (See my previous post Too Many Answers)

  • What could have been done better:
    • Better planning and execution of the determination of where and how the tweeters were to be installed in the car.

    • Complete the task at hand without the damage to any unrelated body parts.


So, there you have it, a quick & dirty summary of what occurred and what I thought about the process.

Now, let me tell you about the results.

The acoustic difference is amazing. I told Exile about it and came up with this comparison.

A set of headphones gives you a centrally located sound stage, there is not a front or back, just side to side. This is how my car was previously setup. The soundstage was tat the center of the car, right about the location of the front passengers. I thought it was a good layout until I finished with this install. The soundstage is now at front like that of being at a concert or within the field of a properly setup surround sound system. The difference is night & day. I am so happy with the results. The only thing left to do is get my sub amp replaced (got my RA number today) so I can get it repaired.

Once I get the sub amp back I will have to re-tune the entire system but I think I will be able to call my system complete until I get the drive to install a preamp or EQ. Only time will tell, but I'm feeling pretty damn good about what I've got setup right now.

I will eventually (maybe only once) enter my car into a Psychlone comp. I would love to see what people think when I pull a convertible up to a SPL competition (pretty unusual to say the least). However, the comp is new for this year and it may take a while for it to catch on locally. Time will tell.

Peace!

Read More......