So, I had way too much fun leading up to Angel's birthday. Granted, this was only fun as the younger one that has yet to reach that milestone. We didn't have anything extravagant planned, but we did mange to make it a good night.
Well, apparently I had executed an interesting faux pas prior to the day in question. Historically, I've only felt compelled to inquire against someone's desire for a gift in the event that I don't already know. Therefore, I knew what the gift would be and never asked. As to some additional logic, I knew the item in question would not be on the request list even though the item was a wishlist item. Therefore, since I knew better, I didn't feel the need to ask. Well, this caused all kinds of fears. I got an e-mail from Angel's mom saying that a comment was made regarding me forgetting about their birthday. I guess I never realized that it was an obligatory inquiry instead of a necessity. Of course I didn't forget.
Anyway, the enjoyment for me started the night before her b-day. I kept giving her periodic updates as to the impending midnight hour. I would give her comments like "you only have 2 hours left as a 20-something" or my favorite one, "you only have x time before you are OLD". There were a few others, but those were the memorable ones.
So, in typical fashion, I waited until the day before to go shopping. Thankfully I knew what I was after and where I was getting it from. Therefore, it wasn't a huge deal. I also had further reason for the delay. I knew if I were to have gone shopping earlier, she would have seen the transaction against our account. And it wasn't a particularly small transaction that would have been easily overlooked.
So, even with the periodic time updates for "crossing the line", I made up for it with my gift. I purchased her a set of Diamond Audio D363.5 component speakers. Back around April, I was looking for some more hardware for my car and Angel was with me. She had an opportunity to "view" several tiers of the Diamond Audio line. She instantly fell in love with them. I knew that I couldn't go wrong with them, even if I did stay with their lowest tier. So, at about 12:20 AM on her birthday, I delivered the gift. I couldn't wait. I wanted to see the reaction. I just knew I'd catch her off guard. And I certainly succeeded.
Well, of course, with the delivery of a gift as such, soon followed the installation of the speakers. Angel did the majority of the deconstruction of the dashboard and doors. I had to step in for a couple of things, but she handled the bulk of it. Once we were inside the doors we quickly found out that we would have to obtain an adapter to install the mid-range speakers. The mounting point was square and of course the round speaker was designed to be installed, well, round.
Well, it just so happened that we were taking a trip to Pittsburgh which allowed me to hand deliver the original speaker and the replacement speaker to Mike (proprietor of Car-Speaker-Adapters.com since photos and measurements provided over the phone were not ample to the identification of the correct adapter. He was unable to readily identify the adapter because Hyundia is a model that he hasn't worked with in the past. Therefore, while we were home, he was able to do the fabrication and send us on our way with our new parts.
When we got home, we cut the holes in the covers for the A-pillar, found homes for the crossovers (in the dashboard incidentally) and wired it up. It was such a pleasure to hear them for the first time in their new homes. The difference from factory to aftermarket is just so profound it isn't very funny.
Once we got the car reassembled, it was time to start cruising around to hear how traveling effected the system. Well, even without a 4 channel amp to push the component system, the results are great. I know that Angel is pleased with the results and that just makes me happy.
In closing, I highly recommend after market component speakers to anyone who is looking to improve the clarity and definition of their car stereo system. Please remember, you get what you pay for. Therefore, if you go to Wally-World and buy the $50 specials and are then not happy with their performance, don't blame me.
Additionally, the tweeter placement is also very important. I cannot give you pointers on this because I've only dabbled into this arena just recently. I have seen only two configurations with any real scrutiny and there are, by far, many more than that to choose from. I can say that there is a stark difference between my car and Angel's. This is not only due to speaker design & manufacturing differences (i.e. cost) but also from installation placement. My system has front to back depth whereas her's has a left-to-right depth.
Sunday, February 1, 2009
Angel's 30!!
Posted by
Gigawatz
at
8:00 AM
0
comments
Labels: Audio, Cars, Family, Married Life
Saturday, January 31, 2009
We're Still Alive
Everyone who periodically checks in with us, I apologize. We have been quiet for a while again. According to my login, my last post was in mid October. I have half written messages that need completing, I have more Driver's Rant articles on the table, and I also have much catching up to do. However, in the grand scheme of things, there haven't been many earth shattering occurrences during this latest quiet time.
I am not going to get in-depth on each topic that I would like to catch-up with here. However, here is a quick run-down of the highlights:
Of course there is a story that can go along with each event. A couple of them have already been started and I may get around to writing about the others. Time will tell.
However, you may be asking yourself, "What has come about that I'm finally getting around to doing some writing again?" Well, that would be a fine question. I am patiently waiting for an OS installation to complete on my new server. My old server finally kicked the bucket and I'm working on creating its replacement. I'm sure I've noted in the past (around the time we had the lightning strike) that my server wasn't in very good health. Well, I was correct and I neglected to build the replacement server before it went belly up. Thankfully, I know now that I didn't lose any data, although, it was a grave concern at the start of this process.
Speaking of building my server. I can't say how frequently I'll be returning here to put up additional posts. Ever since my unit was placed on alert, it seems that my priorities have changed. I have found much motivation to tie up loose ends that didn't seem so loose before. I have been working on a website now for what feels like almost a year, and I still don't have it complete. I have placed much pressure on myself to get this project completed. This is so that in the event that the mobilization order comes down, I will not have to tell him that the project will have to wait until I get back. I have other projects and things that I would also like to start/continue to follow this one. Therefore, my time is even more at a premium than it was before. I am not saying that I won't get around to it, because I would like to, though, time will dictate the results.
Posted by
Gigawatz
at
8:00 AM
0
comments
Labels: Audio, Cars, Change, Computing, Development, Family, friends, Married Life, Miscellaneous, Our House, Wedding
Saturday, August 23, 2008
Driving Rant - Driving Amnesia
As the first rant in the series, I would like to discuss something that I have a bit of experience with while driving. I like to call it driving amnesia. This is a situation where you are driving and you have several miles under your belt and you suddenly don't remember getting to where you are at. You can't remember all if any of the details of a segment of your trip.
I'm not saying that you forget everything about every the trip you are making, however, there are holes in your memory that cause you to say, "Wow, I didn't realize I was was this far along." An alternative statement might be, "Hmm, how did I get here?" Or my all time favorite from a passenger, "Where are you going?" and you realize that you are not going in the wrong direction because "auto-pilot" kicked in.
As soon as I had decided to leave the radio off, I consciously decided to not slam any brain cells against any of the projects that I am current working on. I have learned in plenty of previous situations that driving amnesia is much more frequent with these topics. Thinking of code and development concepts requires so much concentration that the events that transpire while flying down the road are discarded before they can be committed to memory.
I have not ever had an accident during one of these mental states, however, I'm pretty sure that it can't be safe. I have recently begun trying to actively avoid allowing the driving amnesia from occurring. In the past, the radio blaring with development project contemplation has almost certainly lead to the forgotten miles under my wheels. Lately, almost any time that I am on the road, it is for a distance. The last thing I need is to allow myself to be whisked into a state of mental occupation and disregard what is going on in front of me. With a monthly pilgrimage north to Greenville and the less frequent travel to Pittsburgh, my trips are far from short.
I have thus far in my life taken for granted that I can safely multitask while driving. Generally people like to blame external items like food, drink, cell phones, iPods, radios, flat panel displays, or even GPS units for taking a driver's attention off of the road. However, I will tell you that the internal distractions can be just as worrisome. Driving is not an act to be taken lightly. If you really think about it, it doesn't take much of a distraction to get into a bad situation that could result in the loss of life. If you take for example that my average driving speed from home to Greenville is often at or above 80 miles per hour, it wouldn't take much at that speed to get into that bad situation.
Something as simple as an inconsiderate driver cutting me off when I'm in my head could cause my reaction time to be impaired. How about something else that could be a little bit less out of my control. What if I were to blow a tire or encounter a suspension or steering assembly failure? What if it wasn't my car, but a car in my vicinity? Either situation would likely lead to a catastrophic ending. In an emergency, reaction time could be the difference between life and death when you're going that fast. Sure some of you may say that with that much speed, the worst can be assumed. You may be right, but do you want to take that risk? I don't think I want to.
Another thing to take into consideration is when you are driving on a trip to be considered interstate. One should generally have enough experience in the vehicle to readily identify what are normal sounds and what are sounds that should raise concern. Since I am always driving my own car when I drive solo interstate, I can easily recognize the good and potentially bad sounds in my car. However, if I were to allow myself to zone out in deep thought, any attempt of my car to give me warning signs about problems could easily be missed. For that matter, cruising down the highway blaring my radio could have the same effect.
So, in conclusion, I am admitting that I have a real tendency to not pay enough attention to what I'm doing when I'm driving. I am also saying that I am going to try to become better at applying enough focus on my driving that I don't end up forgetting how I got to where I am at. I would also like to challenge everyone else to pay more attention to what they are doing while behind the wheel. I know for certain that some people are worse at this than I am (I've never run a red light because I treated it like a stop sign, although, my record is far from perfect). With that, I shall close this first topic and await the responses from you, my reader.
Posted by
Gigawatz
at
8:00 AM
5
comments
Labels: Audio, Cars, Development, Driving Rant
Sunday, April 20, 2008
Alabama Trip - Friday and Sunday - MECA Car Stereo Competition
The intended purpose of the weekend was to attend a MECA Stereo competition in Alabama. This intention was almost compromised. It was Thursday afternoon that I was informed that my amplifier had been shipped to the wrong location. It was shipped to Pittsburgh to TNT instead of directly back to me. After some phone calls and further consideration, it was determined that the amp would be overnighted to me from TNT with someone else paying the tab. It wasn't my mistake and I wasn't about to pay for it.
With this development, I was very happy that I had taken Friday off of work. I was going to need all of the time I could find to get my car prepared both for the trip and for the competition. I was up very early on Friday. James was in town for work and had crashed at my place so that we could hang out for a while. I had to have him across town for 9 AM. It was great to have had this opportunity and it also played well into my plans. Since I had to be up to get him to work, it also assured that I would be awake once my FedEx delivery would be made.
All of my activities for Friday, minus packing, revolved around my car. I was preparing a installation booklet outlining the equipment in my car and the effort associated with it. To complete the book, I needed my car complete. I had received my speakers on the previous Friday, so the big wait was all about the amp. The amp was delivered at approximately noon. From that point on, it was a rush to get it tested, photographed and finally installed. Angel got home shortly after 2 and I was just wrapping up the final details of the installation. It took me roughly another hour to get the booklet completed and then it was time to get the packing done.
So, you might be wondering, why didn't I pack between getting home and getting my delivery. Well, it was anxiety. I couldn't focus on packing when I was preoccupied by the work that would follow once my amp did arrive. Therefore, after a quick pack job and loading up the car, we were off around 4. The first stop on the trip was to Kinkos to get the booklet printed out. Everything was already set in a file ready for printing on my thumb drive. Kinkos just had to print and bind it for me. The booklet was comprised of 5 printed pages with a clear front and back. Once the 5 pages were printed, I used their paper cutter and handed them the document back to be bound. With covers, it turned out to be 12 pages and it was spiral bound.
With all of this done, it cost a mere $13 out the door. I can't imagine what it would have cost if I had asked for someone else to do the prep work. Unfortunately, once I decide to change the configuration or add new equipment, I will have to re-do it to some degree. I guess I would have been better off using 8.5 x 11 pages with a 3 hole punch instead of the 8.5 x 5.5 spiral bound pages. This would have made it a bit more flexible. Anyway, it is unique.
After getting the document printed, cut, and bound got us on the road at 5 PM. You can read about the drive in the other Alabama trip post. Another touch on the preparation for the trip included a two day car washing effort. I took the car on Tuesday to a DIY car wash to get her clean and didn't finish off with the liquid wax. Wednesday was the wax job. I found a new tool that I thought would be interesting to try. I picked up a Mother's Power Ball.
It came with a bottle of liquid wax, so I gave that a shot too. Typically, I like to use Mother's Gold paste wax and do it within direct sunlight so it gets very hard and shines marvelously. So, a liquid wax was a new effort for me. In using this new "toy" and liquid wax, I tore through 4 drill batteries just to get the car waxed. I either have to apply this stuff by hand next time or get more batteries so that a lull in the action doesn't happen again. (I had to wait for another battery to charge before I could finish completely.)
So, the drive to Alabama did a number on my wash & wax job. I had expected some degradation of the job, but the number of bugs that were collected on the front bumper and windshield were horrible. Even after a quick wipe down on Sunday morning, there were still bugs left over. So, the drive from Huntsville to Boaz was a bit more exciting than I would have liked to find. The directions that I pulled up terminated about 15 minutes short of our destination. Another word to the wise, double check the location that a mapping service pulls up for you before printing and leaving. The address that Google Maps grabbed for me was not correct and created a brief but stressful situation when we landed in the wrong location.
So, the flyer for the competition event sponsored by Wild Bill's Electronics in Boaz, Alabama indicated that registration started at 9 and that the competition judging would start at 10:30. Well, I don't know what judging started at 10:30, but it certainly wasn't the sound quality judging. Anyway, we got there at approximately 9:30 and had our area setup and registered by 10. I entered into two competitions, Sound Quality (Amateur bracket) and RTA Freq Out. You can find the specifics about these two events in the rule book, but I will gloss over the events to save you some reading.
The objective in the Sound Quality (SQ) event is to have the most realistic reproduction of the selected competition material as possible. This reproduction includes staging as a criteria. The term staging represents that all of the frequencies appear to originate from in front of you. In the amateur class, this is all that is important, however, in the non-amateur classes there are more aspects such as direction (center/left/right), height, and width. There are many more criteria, such as system noise, frequency response, linearity, dynamics, and ambiance. The system noise check can only reduce your score, not enhance it. Frequency response is in regards to the clarity and ability to reproduce the frequencies with accuracy. Linearity is in regards to how the frequency response reacts to volume changes; are the frequencies reproduced equally at different volumes? Dynamics are in regards to the ability of the system to accurately reproduce the high and low volumes within the material and ambiance is the ability to reproduce the size and space of the environment in which the music was recorded. The rulebook gets into more detail about how to score each of these areas.
So, since I am in the Amateur class, I am scored on a 70 point scale and scored a 49.5. The winner of the event scored a 54.5. My score put me into 3rd place and was awarded a trophy for it.
The RTA Freq Out event is based on how the system reproduces each frequency range. Pink noise is used to hit all of the frequencies at the same time. A microphone and electronic meter are used to display how the frequencies are being played with an EQ readout. The objective of this event is to have a flat line response across all frequencies. This event is scored on a 40 point scale. My system scored a 27 and the winner scored a 32. This performance was good enough to place me in second of two. Once again, I was awarded a trophy for this event.
Before I get into what can be improved, lets talk about the last award that I received. I was awarded the SQL Most Improved. Typically, this award goes to the competitor that has most improved their system from one competition to another. Therefore, since this is my absolutely first competition, how can I be considered for this award. Well, the reason for this was because of the clinique. MECA league members are able to take advantage of a system review by the judge prior to official judging. Of course, since this was my first event, I certainly took advantage of this offering (I became a MECA member when I registered for the event).
After the clinique, the judge brought to my attention that I was missing some frequency reproduction between my door drivers and my tweeters. Those frequencies are controlled by the passive crossover network. This was not an active crossover or an amplifier controlled area. Therefore, I knew that the only way to change it would be to hit the crossover type control switch inside the passive crossovers. Once the judge came around for the official judging and finished my car, his comment was to the effect of, "that change made your system sound like a completely different car". Between making that major of a change and the fact that this was the first MECA event in the area for the year, they made the exception to the rules to award me with the honor.
Event Results (Be sure to click on the SQL Results link).
My Score Card:
Event picture album.
So, what did I learn during this experience? Well, the first thing I figured out is that in order to improve my performance, I have tons of work to do. I had the opportunity to listen to some of the other competition vehicles (including 2 class winning vehicles that scored 80+ each) and I have a long way to go to get close to that score. The points that I have immediate control of to improve for the next competition is tweeter placement and front stage adjustments. I was told that the stand-up bass was imaging in the rear rather than the front. This will be a simple crossover change for the next comp. Also, to improve my ambiance score, it was recommended that I put my roof & windows up. I don't know if it will hurt or help me to do so. Having the roof & windows up will introduce more surfaces for the frequencies to bounce. It is my opinion that right now, my system sounds better open than closed. I guess will have to wait until I can attend another comp to find the answer to that one.
There is one more major thing that I can do to improve the performance of my system. The RTA Freq Out pointed out to me that without an EQ, there is very little that I can do to make major improvements. Unfortunately, based on my system design, my options for an EQ are very limited and are very expensive. I did some searching at some of the major player websites and have concluded that I have three options.EQ Installation
Zapco DSP6-SL & DRC-SL processor ($1,000)
Alpine System Overhaul.
Audio Control DQS ($499) and DDC ($180)
Alpine PXE-H650 ($450)iDA-X200 - Digital Media Receiver ($300)
PXA-H100 - IMPRINT Audio Processor ($180)
KTX-100EQ - IMPRINT Sound Manager ($250)
After further review of the KTX-H100EQ is not the same as the required add on of the KTX-H100 required for the PXA-H100 to be used. This cost should be less than $250.
At this time, I am not sure as to what solution I am going to take. The two Alpine units (stand alone EQ or system overhaul) look appealing. However, I am not sure I want to cross the line into a realm that is a slippery slope. The Alpine components are known to inter-operate with themselves the best. I don't have the cash or desire to replace my amps also. If I had to pick right now, the Audio Control unit would be the one I would buy. However, I think more research will be required.
Also, while at the competition, I was able to talk directly with the owner of a sound quality based stereo shop in Atlanta. Granted, the shop is about an hour from home. It is such a relief that there are some shops in the ATL area that I can rely on with questions and part requests that will know what I'm after. With the addition to this ship, I now know of two shops with which I can obtain assistance with my car. The other one is much closer, but they don't compete anymore.
I'm sure now that I've successfully completed my first competition that it won't be my last and that the progress with my stereo is far from done. Even if/when I get my car to a point to call it complete, there is still Angel's car to be dressed. I'm sure that will provide just as much if not more updates in the future.
Posted by
Gigawatz
at
11:10 PM
1 comments
Labels: Audio, Cars, Financial, Miscellaneous, Vacation
Saturday, April 19, 2008
Brief Update
This is just a preview post for a few topics that I will be posting following this one with further details. It has been a little while since my last contribution to my blog. I felt that some of the recent topics required a follow-up.
1. Workout - Well, since the back incident, the P90X program has not been resurrected as of yet. However, I pledged that I was going to start running & other preparation for my up coming PT test. Well, that hasn't worked out so much better either. Since my second run last week, I have yet to go again. This past weekend had much to do with that, which lead directly into a user conference for work and then more yard work. Hopefully, next week will bring more disciplined results.
2. Yard work - Yes, the yard work continues. We have well exceeded 40 man hours of work that has been invested in this adventure. Unfortunately, I heard a rumor that rain is expected this weekend and in the event that it does appear, that will thwart further progress there. I'm hoping for a poor meteorological read for the weekend outlook and that I might be able to call the "finding of the yard" complete. See the follow-up post for more information as to what we've done recently and some of the things we're planning.
3. Car Stereo - Well, I competed in my first MECA Sound Quality Competition this past weekend. Lets just say that based on my results I have something to be proud of in my car. However, my creation is not exactly "audiophile" quality yet. Unfortunately, the leap further into that classification will be long in coming. See the follow-up post on the topic for more details.
4. Alabama Trip days 1 and 2 - The early departure for Alabama was credit to the White's. We had been invited to share in the event of a friend renewing their vows. We took the trip and had some notable situations occur in route that will be contained within the follow-up post, but what it boils down to is that the trip was safe, fun, and enlightening. Just a quick note, southern weddings are distinctly from their northern counterparts. However, it doesn't diminish the special nature of the event or the enjoyment of participating, it is just different from what I've come to expect.
So, be sure to check out the additional details on the 3 topics that require follow-up and as always I hope you enjoy this little window into our life together along with our trials, tribulations, and events that we have the opportunity to share with you.
Posted by
Gigawatz
at
2:06 AM
0
comments
Labels: Audio, Cars, Exercise, Family, friends, Miscellaneous, Our House, Vacation
Sunday, March 23, 2008
Amplifier Saga Continues
As most of you know, shortly after buying our house, my 600W Class D amp blew in my car. Well, the timing was horrible. After buying the house, this had very little priority to get corrected. Well, after getting the component speakers installed in my car, I figured it was about damn time to take action to get my amp fixed. Thankfully, it was still under warranty and it would only cost me shipping to get it fixed. Shipping only is much better than having to pay retail for another new amp.
Well, if that was the end of the story, there wouldn't be much of a story, would there. Well, there is more. After they only had the amp for 2 days, they had repaired and shipped my amp back to me. Within the shipping, there was not a single piece of paper outlining what they had fixed. They told me that documentation would accompany the return. I'm worried, but optimistic.
Obviously, since not having it hooked up for the past 9 or so months, I'm excited to have it up and running. Once I got off of work, I didn't waste any time jumping into the job.
I did the general continuity testing. Turned down the gain on the amp, turned the volume down on my head unit and felt the speakers for vibration. The first time there wasn't any. I turned up the gain on the amp and still nothing. Well, this wasn't any response for good reason, while I was waiting for the amp to return, I installed the remote gain switch and it was turned all the way down. So I disconnect the switch and presto, speaker vibration. I took this as a good omen and reassembled my trunk.
Before I departed, I did the same test again. Speakers are still vibrating. So, I jump into the car with the volume low (residential area and late at night). When I get to 78, I turn it up. Immediately I can notice the difference.. I have a full bass channel again. Unfortunately, this was short lived.
Once I got home, I left the radio on and popped the trunk. Speaker vibration was gone and a faint waft of smoke coming from the area of my amp. I'm in a panic now. I quickly grab the drill with the Phillips head bit attachment in place and start removing my speakers to I can get my trunk floor out of the way. The first thought that ran through my mind was "My car is about to catch on fire in my garage, ahh!!!" Well, thankfully, once I got into my trunk far enough, I was able to find that nothing was on fire.
The smoke was coming from the electronics on my amp. Damn it!! Anyway, I am pissed now. The power light is flickering and the fault light is on solid. WTF? I thought this thing was fixed. Am I being screwed here? What am I going to do now. Well, knowing that my car was safe, I call it a night. As I am lying in bed, the thought occurs to me, what if there is something in my system causing the problem.
Well, I know that the power is clean. I reran all of the wires personally and know that all of the connections are good and all of the wires are in good condition. What else could blow my amp? Well, my speakers could. I'm running 2 speakers with 4 voice coils (VC) (each at 4 Ohms) to present a 1 Ohm load to the amp. If any of the voice coils are damaged and are not at their correct resistance of 4 Ohms, then that could damage the amp.
I pull out my (not so) trusty multimeter and try to get a reading on my speakers. Well, my meter just told me that there was continuity but not at what resistance. The next day I bought a new meter and it told me a very bad story. One speaker was well and good. 3.9 Ohms on each coil. The other speaker was not so fortunate. VC1 was 1.5 Ohms and the other VC was only presenting a 0.8 Ohm load. I did the math, with these 4 readings, the amp was seeing a .416 Ohm load. Much less than the 1 Ohm load that it was rated to handle. So, now that I know what the culprit is, when I get my amp back this time, I won't make the same mistake.
Unfortunately, with only one speaker and a shared box environment, I don't have a clue what this will do to my fidelity. I do know that I will have to leave the broken speaker in place to fill the hole so that the ported box will stay in tune, but I'm not sure how a passive driver will effect the sound. I do know that running my amp at a 2 Ohm load will drastically damper its capability. My 600W amp will now run at 300W (at 12 volts) I imagine that it will run about 440W at 14.4 volts. I guess that is plenty when I'm trying to enter a Sound Quality (SQ) competition. I don't need all of the extra power and "boomy" base for SQ.
As for my broken speaker, I have contacted the manufacturer (it is out of warranty) to see if they can repair the VCs at a reasonable cost. These speakers each cost between $125 and $150 brand new. Also, the manufacture has stopped making this line of speaker. I am not certain that they will be willing to fix it for that reason. If they won't play nice with me, then I guess I'll run crippled for a while until I can justify spending the money to get it replaced.
More to come in this saga once I get my amp back yet again.
Posted by
Gigawatz
at
4:04 AM
0
comments
Labels: Audio, Cars, Financial, Miscellaneous